RJH 16V 472MJ8 Elna

Radial Type RJH 32646 Elna Pages 64-79 11/16/98 11:43 AM Page 76 RJH Miniature Aluminum Electrolytic Capacitors Series RJH High-Frequency, Extra Low-impedance Type Very high reliability, biodegradable.. High-frequency, Extra Low-impedanceType. Guaranteed for 5000 hours at 105C (2000 hours for f 5 to f 6.3) (3000 hours for f 8 to f 10) Outline Drawing Photo d 0.05 copper clad Vent (except 5) steel wire (tinned) Sleeve L + max. 15 min. 5 min. Lead spacing and wire diameter D 5 6.3 8 10 12.5 16 18 F 2.0 2.5 3.5 5.0 7.5 d 0.5 0.5/0.6 0.6 0.8 1.0 2.0 Unit: mm Specifications No. Item Performance 1 Temperature range (C) 55 to +105 2 Leakage current (m A) Less than 0.01 CV + 2 (after two minutes) C: Capacitance (m F), V: Voltage (V) 3 Capacitance tolerance (%) 20 (20C, 120 Hz) Rated voltage (V) 6.3 10 16 25 35 50 63 100 Tangent of loss angle (20C, 4 tan d 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07 120 Hz) (tan d ) 0.02 is added to each 1000m F increase over 1000m F Rated voltage (V) 6.3 10 16 25 35 50 63 100 Stability at low 5 Z25C/Z+20C 2 Impedance temperature ratio Z55C/Z+20C 3 (120 Hz) Test time 5000 hrs (f5 to f 6.3 2000 hrs, f 8 to f 10 is 3000 hrs) Endurance Leakage current Initial specified value or less 6 (105C) Change in capacitance Within 20% of initial value (Applied ripple current) tan d 200% or less of initial specified value Test time 1000 hrs Max. storage temp. Leakage current Initial specified value or less 7 (105C) Change in capacitance Within 15% of initial value tan d 150% or less of initial specified value 8 Applicable Standards JIS C 5102 and JIS C5141 Coefficients of Frequency for Ripple Current Frequency (Hz) 120 1 k 10 k 100 k Capacitance (m F) 0.47 to 4.7 0.40 0.68 0.78 1 Coefficients of Temperature for Ripple Current 5.6 to 47 0.50 0.76 0.87 1 56 to 270 0.70 0.85 0.90 1 Temperature (C) +70 or less +85 +105 330 to 1000 0.80 0.93 0.98 1 Coefficients 1.96 1.68 1 1200 to 15000 0.90 0.95 1 1 This catalog printed in U.S.A. on 1/98. 76 Specification and dimensions in this catalog are subject to change without notice. If necessary, drawings can be provided. D + 0.5 max. F 0.5Radial Type RJH 32646 Elna Pages 64-79 11/16/98 11:43 AM Page 77 RJH Miniature Aluminum Electrolytic Capacitors Case size by working voltage & capacitance (in mm) (mm) WV(V) 6.3 10 16 25 35 50 63 100 Cap.(F) 0.47 5 x 11.5 5 x 11.5 1 2.2 5 x 11.5 3.3 5 x 11.5 4.7 5 x 11.5 5.6 5 x 11.5 8.2 5 x 15 10 5 x 11.5 12 5 x 11.5 6.3 x 11.5 18 5 x 11.5 5 x 15 6.3 x 15 22 8 x 12 27 5 x 15 6.3 x 11.5 5 x 11.5 10 x 12.5 33 8 x 15 / 10 x 16 6.3 x 15 39 5 x 11.5 5 x 15 6.3 x 11.5 8 x 20 47 8 x 12 56 5 x 15 10 x 12.5 10 x 20 5 x 11.5 6.3 x 11.5 6.3 x 15 8 x 12 10 x 25 / 12.5 x 15 68 8 x 15 / 10 x 16 6.3 x 15 82 5 x 11.5 5 x 15 6.3 x 11.5 8 x 15 / 10 x 12.5 8 x 20 100 5 x 11.5 10 x 16 5 x 15 10 x 30 / 12.5 x 20 120 6.3 x 11.5 6.3 x 15 8 x 12 8 x 20 10 x 20 12.5 x 25 / 16 x 15 18 x 15 150 5 x 15 10 x 25 / 12.5 x 15 10 x 12.5 180 6.3 x 11.5 6.3 x 15 8 x 12 8 x 15 / 10 x 16 10 x 20 / 12.5 x 15 10 x 30 12.5 x 30 / 16 x 20 220 6.3 x 11.5 6.3 x 15 8 x 15 / 10 x 12.5 10 x 25 12.5 x 35 / 16 x 25 8 x 20 12.5 x 20 / 16 x 15 270 8 x 12 12.5 x 40 / 18 x 20 10 x 16 12.5 x 25 8 x 12 8 x 15 / 10 x 12.5 330 6.3 x 15 8 x 20 10 x 20 / 12.5 x 15 10x30/12.5x20/16x15 18 x 15 16 x 31.5 / 18 x 25 390 10 x 16 10 x 25 12.5 x 30 / 16 x 20 16 x 35.5 / 18 x 31.5 470 8 x 12 10 x 20 / 12.5 x 15 12.5 x 25 / 18 x 15 16 x 40 8 x 15 / 10 x 12.5 8 x 20 12.5 x 35 / 18 x 20 560 18 x 35.5 10 x 16 10 x 25 10x30/12.5x20/16x15 12.5 x 30 12.5 x 40 / 18 x 20 680 8 x 15 / 10 x 12.5 8 x 20 10 x 20 / 12.5 x 15 12.5 x 25 / 18 x 15 12.5 x 35 / 16 x 20 16 x 31.5 / 18 x 25 18 x 40 820 10 x 16 10 x 25 10x30/12.5x20/16x15 12.5x40/16x25/18x20 16 x 35.5 / 18 x 31.5 1000 8 x 20 16 x 31.5 / 18 x 25 16 x 40 / 18 x 35. 10 x 20 / 12.5 x 15 12.5 x 25 12.5 x 30 / 16 x 20 1200 10 x 20 / 12.5 x 15 10 x 25 10 x 30 / 12.5 x 20 18 x 15 12.5x35/16x25/18x20 16 x 35.5 18 x 40 10 x 25 1500 10 x 30 12.5x25/16x15/18x15 12.5 x 30 / 16 x 20 12.5 x 40 16 x 40 / 18 x 31.5 1600 12.5 x 20 1800 16 x 31.5 / 18 x 25 16 x 15 12.5x35/16x25/18x20 18 x 35.5 2200 10 x 30 / 12.5 x 20 12.5 x 40 16 x 35.5 / 18 x 31.5 18 x 40 12.5 x 25 / 18 x 15 12.5 x 30 / 16 x 20 2700 16 x 31.5 / 18 x 25 12.5 x 25 / 16 x 15 12.5 x 30 12.5x35/16x25/18x20 16 x 40 / 18 x 35.5 3300 18 x 15 12.5 x 35 / 16 x 20 12.5 x 40 16 x 35.5 / 18 x 31.5 18 x 40 3900 12.5 x 30 12.5x40/16x25/18x20 16 x 31.5 / 18 x 25 16 x 40 / 18 x 35.5 4700 12.5 x 35 / 16 x 20 18 x 25 16 x 35.5 / 18 x 31.5 18 x 40 5600 12.5x40/16x25/18x20 16 x 40 16 x 31.5 6800 16 x 31.5 / 18 x 25 16 x 35.5 / 18 x 31.5 18 x 35.5 8200 16 x 31.5 16 x 40 / 18 x 35.5 18 x 40 10000 18 x 31.5 18 x 40 12000 16 x 40 / 18 x 35.5 15000 18 x 40 This catalog printed in U.S.A. on 1/98. 77 Specification and dimensions in this catalog are subject to change without notice. If necessary, drawings can be provided.