INTERNAL Ericsson InterUnalSE ONLY PRODUCT SPECIFICATION 1 (4) TABLE OF CONTENTS 2 (3) PrPreparepareedd ( (Sualsbjo sect rubjesecp)t r esponsible if other) NoNo.. jidgjian Grace JiangEAB/FAC/P Susanne Eriksson 1/1301-BMR 463 Uen BPOW 00201-00152 Uen Technical SpecicationTechnical SpecicationTechnical Specication Approved Checked Date Rev Reference Approved (Document resp) Checked Date Rev 1/28701 - BMR463 Rev. B July 2019 1/28701 - BMR463 Rev. B July 20191/28701 - BMR463 Rev. B July 2019 BMR4BMR4BMR4666333 series series series PoL RegulatorsPoL RegulatorsPoL Regulators EAB/FAC/P Susanne Eriksson 7/8/2019 2009-07-10 DPH1 DX FlexFlexFlex Input Input Input 444.5-14.5-14.5-14 V, Output up to V, Output up to V, Output up to 252525 A A A /// 82.582.582.5 W W W Key Features Small package 25.65 x 13.8 x 8.2 mm (1.01 x 0.543 x 0.323 in) SIP: 26.3 x 7.6 x 15.6 mm (1.035 x 0.30 x 0.614 in) 0.6 V - 3.3 V output voltage range High efficiency, typ. 97.1% at 5Vin, 3.3Vout half load Configuration and Monitoring via PMBus Dynamic Loop Compensation (DLC) & fast loop transient response Synchonization & phase spreading Current sharing, Voltage Tracking & Voltage margining MTBF 20.2 Mh General Characteristics For narrow board pitch applications (15 mm/0.6 in) Non-Linear Response for reduction of decoupling cap. Input under voltage shutdown Safety Approvals Design for Environment Over temperature protection Output short-circuit & Output over voltage protection Remote Control & Power Good Voltage setting via pin-strap or PMBus Meets requirements in high- Advanced Configurable via Graphical temperature lead-free soldering Used Interface processes. ISO 9001/14001 certified supplier Highly automated manufacturing ensures quality Contents Ordering Information ............................................................. 2 General Information ............................................................. 2 Safety Specification ............................................................. 3 Absolute Maximum Ratings ............................................................. 4 Electrical Specification 20A/ 0.6-3.3V Through hole and Surface mount version BMR4630002, BMR4631002 BMR4630006, BMR4631006 ................ 5 20A/ 0.6-3.3V Single in Line version (SIP) BMR4632002 ...................................... 14 25A/ 0.6-3.3V DLC,Through hole and Surface mount version BMR4630008, BMR4631008 BMR4630009, BMR4631009 .............. 23 25A/ 0.6-3.3V DLC, Single in Line version (SIP) BMR4632008 ...................................... 32 EMC Specification ........................................................... 41 Operating Information ........................................................... 41 Thermal Consideration ........................................................... 52 Connections ........................................................... 53 Mechanical Information ........................................................... 63 Soldering Information (Lay Down version) ........................................................... 66 Delivery Information (Lay Down version) ........................................................... 67 Soldering Information (SIP version) ........................................................... 68 Delivery Information (SIP version) ........................................................... 68 Product Qualification Specification ........................................................... 69 INTERNAL USE ONLY PRODUCT SPECIFICATION 2 (4) Prepared (Subject resp) No. jidgjian Grace Jiang 1/1301-BMR 463 Uen 22 Technical SpecicationTechnical Specication Approved (Document resp) Checked Date Rev 1/28701 - BMR463 Rev. B July 20191/28701 - BMR463 Rev. B July 2019 BMR4BMR46633 series series PoL RegulatorsPoL Regulators 7/8/2019 PH1 X FlexFlex Input Input 44.5-14.5-14 V, Output up to V, Output up to 2525 A A // 82.582.5 W W Telcordia SR-332 Issue 2 Method 1 to calculate the mean Ordering Information steady-state failure rate and standard deviation ( ). Product program Output BMR 463 x002/001 (x=0,1,2) 0.6-3.3 V, 20 A/ 66 W Telcordia SR-332 Issue 2 also provides techniques to BMR 463 x006/001 (x=0,1) 0.6-3.3 V, 20 A/ 66 W estimate the upper confidence levels of failure rates based BMR 463 x008/001 (x=0,1,2) 0.6-3.3 V, 25 A/ 82.5 W on the mean and standard deviation. BMR 463 x009/001 (x=0,1) 0.6-3.3 V, 25 A/ 82.5 W Mean steady-state failure rate, Std. deviation, 49 nFailures/h 12.4 nFailures/h Product number and Packaging BMR 463 n n n n /n n n n 1 2 3 4 5 6 7 8 MTBF (mean value) for the BMR 463 series = 20.2 Mh. Options n n n n / n n n n 1 2 3 4 5 6 7 8 MTBF at 90% confidence level = 15.3 Mh Mounting / Mechanical / Compatibility with RoHS requirements Hardware The products are compatible with the relevant clauses and / Variants requirements of the RoHS directive 2002/95/EC and have a Configuration / maximum concentration value of 0.1% by weight in homogeneous materials for lead, mercury, hexavalent Packaging / chromium, PBB and PBDE and of 0.01% by weight in homogeneous materials for cadmium. Options Description Exemptions in the RoHS directive utilized in Flex power n 0 Through hole mount version (TH) 1 modules products are found in the Statement of 1 Surface mount version (SMD) Compliance document. 2 Single in line (SIP) n 0 Standard mechanical option 2 Flex fulfills and will continuously fulfill all its obligations 1 Long pin option, 5.5 mm pin length (for under regulation (EC) No 1907/2006 concerning the SIP) registration, evaluation, authorization and restriction of 4 LB pin option, 4.57 mm pin length (for chemicals (REACH) as they enter into force and is through SIP) product materials declarations preparing for the obligations to communicate information on substances in the products. n n 02* 20 A, Standard variant 3 4 06* 20 A, Pin 4A = Power Good pin (for Lay Down version only) Quality Statement 08* 25 A, Standard variant, The products are designed and manufactured in an Dynamic Loop Compensation industrial environment where quality systems and methods 09* 25 A, Pin 4A = Power Good pin, Dynamic Loop Compensation (for Lay like ISO 9000, Six Sigma, and SPC are intensively in use to Down version only) boost the continuous improvements strategy. Infant mortality or early failures in the products are screened out n n n 001 CTRL pin positive logic (active high) 5 6 7 and they are subjected to an ATE-based final test. 002 CTRL pin negative logic (active low) Conservative design rules, design reviews and product qualifications, plus the high competence of an engaged n B Antistatic tray of 100 products (SIP only) 8 work force, contribute to the high quality of our products. C Antistatic tape & reel of 200 products (Sample delivery available in lower quantities. Not for SIP) Warranty Warranty period and conditions are defined in Flex General * Voltage Tracking and Power Good pins are options for Lay Down version Terms and Conditions of Sale. products. (Pin 4A=Voltage Tracking pin in standard Lay Down version) Both Voltage Tracking pin and Power Good pins are available in standard SIP version. (See Connections information in page 53) Limitation of Liability Flex does not make any other warranties, expressed or Example: Product number BMR 463 0002/001C equals a through-hole mounted, standard Lay Down mechanical option, voltage tracking pin at 4A, implied including any warranty of merchantability or fitness positive RC logic, package tape & reel. for a particular purpose (including, but not limited to, use in life support applications, where malfunctions of product can General Information cause injury to a persons health or life). Reliability Flex 2019 The failure rate ( ) and mean time between failures The information and specifications in this technical (MTBF= 1/ ) is calculated at max output power and an specification is believed to be correct at the time of operating ambient temperature (T ) of +40C. Flex uses A