ERSA SMT UNIT 60 A Micro tool / Pincette 40 65 / 130 W heat up rating SMD Soldering and Desoldering Station - to meet every budget 2 212 SD The SMT UNIT 60 A from ERSA The multifunctional holder with will handle virtually any soldering its swiveling sponge container job - whether it is SMD soldering, also functions as a hot tip holder. 1 2 212 BD desoldering or repair work. The holder is designed so that you It is electronically temperature- can use ERSA soldering irons with controlled and antistatic according any commercially available solder 1 2 to MIL-SPEC/ESA-standards fume extraction system provided 212 CD and has two separately controlled you have an adapter. The ultra-fine 0.2 mm (0.008) tip (212 SD) tools: the ultra-light ERSA Micro tool SMD soldering iron and the 212 ED 1 2 versatile ERSA Pincette 40 for desoldering. An extensive range of SMD soldering and desoldering 212 KD 1 Quick and easy SMD rework tips compliments these tools. The Micro tool has a range of long-lasting ERSADUR soldering A 2 212 FD B tips beginning at 0.2 mm (0.008), making it ideal for very fine and compact soldering work. The 2 212 GD revolutionary ERSA MicroWell tip enables you to install fine-pitch SMDs in a matter of seconds. 2 212 MS The desoldering tip range of the Pincette 40 covers everything from MELFs and mini-MELFs to SOIC packages, QFPs and PLCCs. 2 212 WD C Its wide range of tips means you can use the ERSA SMT UNIT 60 A to work on practically any commercially available SMT Cross section of an ERSADUR- soldering tip (see p. 9) component. And because you can Please ask for our tip sheet change the rapid heat up tips with addtional tips in a matter of seconds, even 1 Tips for SMD 8012 when they are hot, you can work 20 2 Tips for SMD 8013 quickly and efficiently. Desoldering tips (pair) for Technical data: Weight (without cable): appr. 25 g (1 oz) Order nos: Pincette 40 Cable: 1.2 m (3.9 ft) highly flexible/ SMT 603 A electronic station SMT 60 A SMT UNIT 60 A soldering heat resistant, antistatic Supply voltage: 230 V~, 50-60 Hz and desoldering station Model: antistatic according to Secondary voltage: 24 V~ complete MIL-SPEC/ESA standards Rating: 60 W Control technique: RESISTRONIC consisting of: Pincette 40 desoldering tweezers Temperature range: 422 ED: 6 mm (0.236 in) SMT 603 A Electronic station Voltage: 24 V~ 1 2 Micro tool: SOIC 8 Rating: 2 x 30 W / 280C (545F) 270 BDJ Micro tool soldering iron stepless 150C (300F) - 400C (750F) with 212 BD soldering tip - 2 x 20 W / 350C (660F) Pincette 40: subject to tips Heat up rating: 130 W 430 EDJ Pincette 40 desoldering Function display: red LED tweezers with 422 ED Heating time: subject to tips Cable: 2 m (6.6 ft) PVC with connector desoldering tips Weight (without cable): appr. 75 g (3 oz) Model: safety insulated, antistatic Cable: 1.2 (3.9 ft) m highly flexible/ A 29 Holder for Micro tool 422 FD 3: 7,5 mm (0.295 in) according to MIL-SPEC/ESA standards A 30 Holder for Pincette 40 heat resistant, antistatic SOIC 12 Model: antistatic according to 43400 Tip turn protection set Micro tool soldering iron 422 FD 1: 10 mm (0.394 in) for type 422 MIL-SPEC/ESA standards Voltage: 24 V~ 1 2 SOIC 16 43500 Tip turn protection set Rating: 30 W / 280C (545F) 422 FD 4: 12,5 mm (0.492 in) for type 212 and 422 - 20 W / 350C (660F) 2 SOIC 20 Heat up rating: 65 W 422 FD 2: 15 mm (0.591 in) Heating time: appr. 50 s (to 280C/545F) 1 2 SOIC 24 422 FD 5: 17,5 mm (0.689 in) 2 SOIC 28 422 FD 6: 20 mm (0.787 in) C.CAPAC./MELF SOT&DPAK TSOP/SOIC PLCC/LCCC BQFP/PQFP 2 SOIC 32 422 FD 7: 25 mm (0.984 in) Please choose your suitable SMD desoldering tips out of the series 422. (further SMD desoldering tips upon request) SOIC 40 422 FD 8: 27,5 mm (1.082 in) 422 FD 9: 40 mm (1.574 in) Please ask for our free-of-charge process descriptions ERSA SMD tip holder Fine-Pitch Installation and SMD-removal (see page 31) Order nos.: 422 QD 5: 10 mm (0.394 in) SMD 8012 SMD tip holder 2 completely equipped PLCC 20 consisting of: 422 QD 1: 12,5 mm (0.492 in) SH 03 Tip holder 1 PLCC 28 ERSADUR-SMD soldering tips 422 QD 6: 15 mm (0.591 in) 212 BD pencil point 0.4 mm (0.016 in ) QFP, TQFP, TTQFP 212 CD chisel shaped, 1.0 mm TTQFP 80T25 (0.039 in) 422 QD 3: 17,5 mm (0.689 in) 212 ED chisel shaped, 1.8 mm 1 2 PLCC 44 (0.071 in) 212 KD chisel shaped, extended, 422 QD 4: 20 mm (0.787 in) 1.8 mm (0.071 in) 1 PLCC 52 SMD-desoldering tips (pair) 422 QD 2: 25 mm (0.984 in) 422 MD for MELFs a. MINIMELFs 1 PLCC 68 422 ED 6 mm (0.236 in) 422 QD 7: 30 mm (1.191 in) for SOIC 8 422 FD 1 10 mm (0.394 in) PLCC 84 for SOIC 16 422 QD 8: BQFP 132 422 FD 2 15 mm (0.591 in) for SOIC 24 422 QD 9: BQFP 100 SMD 8012 422 QD 1 12.5 mm (0.492 in) 422 QD 10: 22,5 mm (0.886 in) for PLCC 28 QFP 112 The fully equipped tip holder makes This extremely practical and 422 QD 3 17.5 mm (0.689 in) for PLCC 44 422 RD 1: 22,5 x 16,5 mm organizing and accessing your ergonomical tip holder is an 422 QD 4 20 mm (0.787 in) (0.886 x 0.650 in) SMD soldering/desoldering tips indispensable aid that no SMD for PLCC 52 QFP 100 an easy task, while at the same workbench should be without. 422 QD 2 25 mm (0.984 in) 422 RD 2: 15 x 12,5 mm time saving space for PLCC 68 (0.591 x 0.492 in) PLCC 32 422 RD 3: 15 x 10 mm Order nos: 212 MS MicroWell, 2.3 mm/0.091 in (0.591 x 0.394 in) 212 WD MiniMicroWell, 1.6 mm/0.063 in PLCC 28-1 SMD 8013 SMD tip holder completely equipped SMD-desoldering tips (pair) 422 SD: MICROMELF 422 SD for MICROMELF 2 consisting of: 422 MD for MELFs a. MINIMELFs SH 03 Tip holder 422 ED 6 mm/0.236 in, for SOIC 8 422 FD 1 10 mm/0.394 in, for SOIC 16 ERSADUR-SMD soldering tips 212 SD pencil point, 0.2 mm/0.008 in 422 FD 4 12.5 mm/0.492 in, for SOIC 20 422 FD 2 15 mm/0.591 in, for SOIC 24 212 BD pencil point 0.4 mm/0.016 in 422 MD: MELFS/MINIMELFS 212 CD chisel-shaped, 1.0 mm/0.039 in 422 FD 5 17.5 mm/0.689 in, for SOIC 28 1 2 422 FD 6 20 mm/0.787 in, fr SOIC 32 212 ED chisel-shaped, 1.8 mm/0.071 in 1 Tips for SMD 8012 422 QD 5 10 mm/0.394 in, for PLCC 20 212 FD chisel-sh., reinf., 2.2 mm/0.087 in SMD 8013 21 2 Tps for SMD 8013 212 GD chisel-sh., reinf, 3.2 mm/0.126 in 422 QD 3 17.5 mm/0.689 in, for PLCC 44