FTLF1419P1BCL

Product Specification 2 Gb/s RoHS Compliant Long-Wavelength Pluggable SFP Transceiver FTLF1419P1xCL PRODUCT FEATURES Up to 2.125Gb/s bi-directional data links Hot-pluggable SFP footprint Built-in digital diagnostic functions Uncooled 1310nm DFB laser transmitter Duplex LC connector RoHS compliant and Lead Free No Rate Select input required for Fibre Channel 1x/2x Operation APPLICATIONS Up to 55 km on 9/125m SMF 1.25Gb/s 1000Base-LX Ethernet Metal enclosure, for lower EMI Dual Rate 1.06 / 2.125 Gb/s Fibre Single 3.3V power supply Channel Low power dissipation <700mW typical Extended operating temperature range: -10C to 70C Finisars FTLF1419P1xCL Small Form Factor Pluggable (SFP) transceivers are 1 compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) . 2 They simultaneously comply with Gigabit Ethernet as specified in IEEE Std 802.3 , and 3,4 1x and 2x Fibre Channel as defined in FC-PI 13.0 . The optical transceivers are compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details. Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA. PRODUCT SELECTION FTLF1419P1xCL x W Wide Extraction Bail B Narrow Extraction Bail Finisar Corporation July 2015 Rev. B Page 1 FTLF1419P1xCL Pluggable SFP Product Specification I. Pin Descriptions Pin Symbol Name/Description Ref. 1 V Transmitter Ground (Common with Receiver Ground) 1 EET 2 T Transmitter Fault. Not supported. FAULT 3 T Transmitter Disable. Laser output disabled on high or open. 2 DIS 4 MOD DEF(2) Module Definition 2. Data line for Serial ID. 3 5 MOD DEF(1) Module Definition 1. Clock line for Serial ID. 3 6 MOD DEF(0) Module Definition 0. Grounded within the module. 3 7 Rate Select No connection required 4 8 LOS Loss of Signal indication. Logic 0 indicates normal operation. 5 9 V Receiver Ground (Common with Transmitter Ground) 1 EER 10 V Receiver Ground (Common with Transmitter Ground) 1 EER 11 V Receiver Ground (Common with Transmitter Ground) 1 EER 12 RD- Receiver Inverted DATA out. AC Coupled 13 RD+ Receiver Non-inverted DATA out. AC Coupled 14 V Receiver Ground (Common with Transmitter Ground) 1 EER 15 V Receiver Power Supply CCR 16 V Transmitter Power Supply CCT 17 V Transmitter Ground (Common with Receiver Ground) 1 EET 18 TD+ Transmitter Non-Inverted DATA in. AC Coupled. 19 TD- Transmitter Inverted DATA in. AC Coupled. 20 V Transmitter Ground (Common with Receiver Ground) 1 EET Notes: 1. Circuit ground is internally isolated from chassis ground. 2. Laser output disabled on T >2.0V or open, enabled on T <0.8V. DIS DIS 3. Should be pulled up with 4.7k - 10 kohms on host board to a voltage between 2.0V and 3.6V. MOD DEF(0) pulls line low to indicate module is plugged in. 4. Finisar FTLFxx21xxxxx transceivers operate between OC-3 and OC-48, 1x and 2x Fibre Channel, and Gigabit Ethernet data rates and respective protocols without active control. Finisar FTLFxx19xxxxx transceivers operate at 1x and 2x Fibre Channel, and Gigabit Ethernet data rates and respective protocols without active control. 5. LOS is open collector output. Should be pulled up with 4.7k 10 kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation logic 1 indicates loss of signal. VeeT 20 1 VeeT TD- 19 2 TXFault TD+ 18 3 TX Disable VeeT 17 4 MOD-DEF(2) VccT 16 5 MOD-DEF(1) Towards Towards VccR 15 Bezel 6 MOD-DEF(0) ASIC VeeR 14 7 Rate Select RD+ 13 8 LOS RD- 12 9 VeeR VeeR 11 10 VeeR Pinout of Connector Block on Host Board Finisar Corporation July 2015 Rev. B Page 2