NC01850-B070RS Fujitsu

Data Sheet FUJITSU Component Touch Panel 4-Wire Serial Interface Control Board NC01850-B070RS FUJITSU Component Touch Panels 4-Wire Serial Control Board NC01850-B070RS Fujitsu Serial Interface Controller Board Quick Reference Features Replaces N16B-0558-B270 High quality & reliability touch panel control board with integrated switch for selectable cable tail exit direction for FPC cable 4-wire touch panels RS-232C interface for direct connection to PC or serial interface Used to control 4-wire resistive touch panels PnP or non-PnP mode selectable RoHS compliant NC01850-B070RS Switch Settings Please verify which touch panel type you have. Type 1 or Type 2 please refer to the panel drawing on our website. Panel Orientation Coordinates Origin A B C D Panel Type SW1-1 ON OFF ON OFF 1 SW1-2 OFF OFF ON ON 1 SW1-3 OFF ON ON OFF 1 Coordinates Origin D A B C Panel Type SW1-1 OFF ON OFF ON 2 SW1-2 ON OFF OFF ON 2 SW1-3 OFF OFF ON ON 2 PNP ID Switch Setting Guide Switch Function Description Default SW2-1 PNP ID setting OFF =12 bits / ON = 14bits OFF SW2-2 PNP enable ON/OFF OFF SW2-3 Baud rate OFF= 9,600bps / ON= 19,200bps OFF SW2-4 Reserved N/A OFF Page 1 of 3 Data Sheet FUJITSU Component Touch Panel 4-Wire Serial Interface Control Board NC01850-B070RS Construction Item Specifications Type 4-wire serial control board Part number NC01850-B070RS Mechanical Size/weight 75mm x 30mm / 30g Electrical Supply voltage (max./min.) 5VDC10% Operating current (detection active) 20mA at Vcc=5V and T=25 C Operating current (detection suspend) 16mA at 5V and T=25C Suspend mode current 5mA at Vcc=5V and T-25 C Environment Operating temperature -5C to +60C Storage temperature -30C to +70C Humidity 20% RH to 85% RH at +38C maximum wet bulb temperature (no condensation) Touch panel connection CN 1 (FCI: SFW4R-1STAE1-LF) Interface connection CN2 (Molex: 53398-0571) No Signal Content 1 +5V +5V (Vcc) 2 TXD Transmit data 3 RXD Receive data 4* CTS PnP ID 5 Vss OV (vss) *: Optional: used for plug-n-play detection Complete specification document is available upon request for customers with whom we have an approved NDA in place. Dimensions Host interface connector CN2 75.0 69.0 25.0 3.0 5 1 1 1 5 1 1 4 30.0 Setting switch SW2 Touch panel interface connector CN3 Setting switch SW1 FPC insertion direction Unit: mm Page 2 of 3