Baldur 9 GB.mif Seite 315 Freitag, 18. Juli 2003 10:15 10 1.04 Puller 2-arm pattern The new model for the safe and fast removal of pulleys, wheels, ball bearings, etc. Due to the bending-moment reinforcement on its back face, the energy-saving design of the cross piece means even stronger and safer pulling work. With the newly-developed cantilever hook design, it is possible to use these higher forces without losses over the whole width of the cross piece. The high-speed adjustment feature supports the energy-saving and fast operation. The spindle possesses an interchangeable tip, meaning that a ball tip may also be employed if necessary. Spindle may be exchanged for hydraulic pressure spindle (see table). Code No. a a a b A Hydraulic spindle c d e max. t 0 1 2 min 2 max 1307703 1.04/1A 130 70 170 100 M 14x1,5 x 140 17 22 15 3,0 3,0 1.2 1307827 1.04/2A 200 110 260 150 G 1/2 x 210 1.06/HSP1 22 30 25 4,5 5,0 3.3 1307940 1.04/3A 350 150 420 200 G 3/4 x 280 1.06/HSP2 27 36 33 6,0 7,5 9.9 1.06 Universal puller 2-arm pattern The reliable model for the fast and safe removal of pulleys, wheels, ball bearings, etc. Strong drop forged design. Reversible hooks permit use as an internal or external puller. Available extras are replaceable hooks for various clamping reaches. Spindle may be exchanged for hydraulic pressure spindle (see table). Code No. a a a b A Hydraulic spindle c d e max. t 0 1 2 min 2 max 8000230 1.06/1 90 60 140 100 M 14x1,5 x 140 17 22 12 3,0 3,0 1.1 8000310 1.06/1A 130 70 180 100 M 14x1,5 x 140 17 22 12 3,0 3,0 1.3 8000580 1.06/2 160 80 220 150 G 1/2 x 210 1.06/HSP1 22 30 18 3,5 5,0 3.2 8000660 1.06/2A 200 90 260 150 G 1/2 x 210 1.06/HSP1 22 30 18 3,5 5,0 3.6 8000740 1.06/3 250 125 330 200 G 3/4 x 280 1.06/HSP2 27 36 28 6,5 7,5 7.8 8000820 1.06/3A 350 125 420 200 G 3/4 x 280 1.06/HSP2 27 36 28 6,5 7,5 9.2 8000900 1.06/4 520 185 600 200 G 1 x 310 1.06/HSP3 36 36 28 6,5 10,0 15.2 8112970 1.06/5 640 230 715 225 G 1 x 310 1.06/HSP3 36 50 33 10,0 18,0 23.5 1.06 Universal puller 2-arm pattern, with extended hooks As universal puller No. 1.06/1 to 1.06/4, but with extended pulling hooks. Spindle may be exchanged for hydraulic pressure spindle (see table). Code No. a a a b A Hydraulic spindle c d e max. t 0 1 2 min 2 max 8108350 1.06/1-2 90 60 140 200 M 14x1,5 x 140 17 22 12 3,0 3,0 1.5 8108430 1.06/1A-2 130 70 180 200 M 14x1,5 x 140 17 22 12 3,0 3,0 1.8 8108510 1.06/2-3 160 80 220 300 G 1/2 x 210 1.06/HSP1 22 30 18 3,5 5,0 4.4 8108780 1.06/2A-3 200 90 260 300 G 1/2 x 210 1.06/HSP1 22 30 18 3,5 5,0 4.8 8001200 1.06/3-3 250 125 330 300 G 3/4 x 280 1.06/HSP2 27 36 28 6,5 7,5 9.1 8108860 1.06/3A-3 350 125 420 300 G 3/4 x 280 1.06/HSP2 27 36 28 6,5 7,5 10.5 8108940 1.06/4-3 520 185 600 300 G 1 x 310 1.06/HSP3 36 36 28 6,5 10,0 16.5 8109080 1.06/3-4 250 125 330 400 G 3/4 x 280 1.06/HSP2 27 36 28 6,5 7,5 10.4 8109160 1.06/3A-4 350 125 420 400 G 3/4 x 280 1.06/HSP2 27 36 28 6,5 7,5 11.8 8109240 1.06/4-4 520 185 600 400 G 1 x 310 1.06/HSP3 36 36 28 6,5 10,0 17.8 8109320 1.06/3-5 250 125 330 500 G 3/4 x 280 1.06/HSP2 27 36 28 6,5 7,5 11.6 8112380 1.06/3A-5 350 125 420 500 G 3/4 x 280 1.06/HSP2 27 36 28 6,5 7,5 13.0 8112460 1.06/4-5 520 185 600 500 G 1 x 310 1.06/HSP3 36 36 28 6,5 10,0 19.0 315Baldur 9 GB.mif Seite 316 Freitag, 18. Juli 2003 10:15 10 1.06 Universal puller 2-arm pattern, with rigid hooks Design as universal puller No. 1.06/1 to 1.06/4, but with rigid pulling hooks. For greater ease in setting the clamping spread. The hooks clamp automically when under tension. The hooks may be reversed to convert the puller from an external one to an internal one. Spindle may be exchanged for hydraulic pressure spindle (see table). Code No. a a a b A Hydraulic spindle c d e max. t 0 1 2 min 2 max 8001470 1.06/11 100 50 140 100 M 14x1,5 x 140 17 22 15 4,0 3,0 0.8 8001040 1.06/1A1 140 60 180 100 M 14x1,5 x 140 17 22 15 4,0 3,0 1.2 8001550 1.06/21 170 80 220 150 G 1/2 x 210 1.06/HSP1 22 30 24 3,5 5,0 2.7 8001120 1.06/2A1 210 90 260 150 G 1/2 x 210 1.06/HSP1 22 30 24 3,5 5,0 3.1 8001630 1.06/31 250 125 340 200 G 3/4 x 280 1.06/HSP2 27 36 32 5,0 7,5 6.6 8001390 1.06/3A1 340 125 430 200 G 3/4 x 280 1.06/HSP2 27 36 32 5,0 7,5 8.0 8109400 1.06/41 520 185 610 200 G 1 x 310 1.06/HSP3 36 36 32 5,0 10,0 14.0 1.06 Universal puller 2-arm pattern, with slim hooks The feet of the hooks are very slim and particularly suitable for barely-accessible places. Code No. a b A c d e f max. t 0 8113510 1.06/S1 100 100 M 14x1,5 x 140 17 27 6 3,6 13 2,5 1.0 8113780 1.06/S1A 140 100 M 14x1,5 x 140 17 27 6 3,6 13 2,5 1.2 8114830 1.06/S2 160 150 G 1/2 x 210 22 40 8 5,0 17 5,0 3.0 8114910 1.06/S2A 200 150 G 1/2 x 210 22 40 8 5,0 17 5,0 3.2 1.06 Fast clamping puller 2-arm pattern, with fast-clamp adjustment The tried and tested model for the safe and fast removal of pulleys, wheels, ball bearings, etc. Strong drop forged pattern. By reversing the hooks, this tool may be used as an internal or external puller. Exchangeable hooks for several clamping reaches available as accessories. With the innovative high-speed clamps, fast and uncomplicated setting-up and readjustment is child s play. Spindle may be exchanged for hydraulic pressure spindle (see table). Code No. a a a b A Hydraulic spindle c d e max. t 0 1 2 min 2 max 1213830 1.06/1-E 90 60 140 100 M 14x1,5 x 140 17 22 12 3,0 3,0 1.1 1215140 1.06/1A-E 130 70 180 100 M 14x1,5 x 140 17 22 12 3,0 3,0 1.3 1216570 1.06/2-E 160 80 220 150 G 1/2 x 210 1.06/HSP1 22 30 18 3,5 5,0 3.2 1217720 1.06/2A-E 200 90 260 150 G 1/2 x 210 1.06/HSP1 22 30 18 3,5 5,0 3.6 1218980 1.06/3-E 250 125 330 200 G 3/4 x 280 1.06/HSP2 27 36 28 6,5 7,5 7.8 1220160 1.06/3A-E 350 125 420 200 G 3/4 x 280 1.06/HSP2 27 36 28 6,5 7,5 9.2 316