C-874-22 General Devices

C-874 Two Section Slide Catalog Load TO ORDER, SPECIFY Number A B C D E F Capacity C-874-10 10.00 9.25 7.00 NONE 1 2 95 LBS. C-874 - - C-874-12 12.00 11.25 9.00 NONE 2 3 95 LBS. C-874-14 14.00 13.25 10.50 NONE 2 3 90 LBS. C-874-16 16.00 15.25 12.00 0.25 2 4 90 LBS. AR - Automatic Length Release if desired C-874-18 18.00 17.25 13.50 0.25 3 5 90 LBS. AND/OR C-874-20 20.00 19.25 15.00 0.25 3 5 85 LBS. RC - See chart below C-874-22 22.00 21.25 16.50 0.25 4 6 85 LBS. C-874-24 24.00 23.25 18.00 0.25 4 6 85 LBS. C-874-26 26.00 25.25 19.50 0.25 4 6 80 LBS. C-874-28 28.00 27.25 21.00 0.25 5 7 80 LBS. Notes C-874-30 30.00 29.25 22.50 0.25 5 7 80 LBS. TM 1. Finish: All standard slides are coated with Poxylube dry film lubricant. 2. All standard slides are designed to lock-out in the extended position and are available with an optional automatic release if lock-out is not desirable. 3. Standard hardware packages include all the hardware necessary to mount your Chassis Trak slides: Rear mounting bracket (B-217 or B-161) included Bar Nuts (CA8056-06-0017 or CA8056-06-0014) 10-32 screws and keps nuts 4. All sliding members of the standard slide are made from cold rolled steel. 5. All Chassis Trak solid bearing slides are supplied with a quick disconnect feature. 6. Optional mounting patterns, slide lengths and extensions are available. 7. For optional mounting brackets see page 34. 31 www.generaldevices.com Phone: 317-897-7000 Email: sales generaldevices.com ISO 9001:2000 Registered Optional Mounting Brackets Matrix For Solid Bearing Slides & Appropriate Rear Mounting Brackets with Range of Extension B-217* B-217-1.5 B-217-2 B-217-2.5 B-217-3 B-217-3.5 B-217-4 B-308 B-793 C-300-D 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 0 to 6.00 0 to 6.00 C-300-S 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 0 to 6.00 0 to 6.00 C-874 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 C-3700 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 B-161* B-161-1.5 B-161-2 B-161-2.5 B-161-3 B-161-3.5 B-161-4 B-309 B-389 C-300-D-RC 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 0 to 6.00 C-300-S-RC 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 0 to 6.00 C-300-S-RC-3S 0 to 6.00 C-874-RC 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 0 to 6.00 C-3700-RC 0 to .50 .25 to .75 .75 to 1.25 1.25 to 1.75 1.75 to 2.25 2.25 to 2.75 2.75 to 3.25 0 to 6.00 Note brackets are made from 16 gauge C.R.S. Standard finish: clear zinc commercial plating *Supplied with standard slides CATALOG NUMBER A B-217 or B-161 1.25 B-217-1.5 or B-161-1.5 1.50 B-217-2 or B-161-2 2.00 B-217-2.5 or B-161-2.5 2.50 B-217-3 or B-161-3 3.00 B-217-3.5 or B-161-3.5 3.50 B-217-4 or B-161-4 4.00 B-217 B-161 B-793 B-308 B-389 B-309 34 www.generaldevices.com Phone: 317-897-7000 Email: sales generaldevices.com ISO 9001:2000 Registered