177-710-115S6K724MNN

Micro-D Harness MWDM Micro-D Shielded Cable Assembly Single-Ended or Double-EndedThese easy-to-order cable assemblies eliminate the need for expensive assembly labor. 100% tested and ready for use. Now With Twisted PairsNo need to create a procurement B specification for Micro-D cables with twisted pairs. Glenair 177-740 cables are furnished with a full complement of white/blue twisted pair wires. Integral Shield TerminationThe connector shell has a platform to accept Band-It shield termination bands. The cable shield braid is attached directly to the connector. Save Labor, Reduce Weight and Improve EMI Shielding with Glenairs Micro-D Shielded Cable Assemblies Aerospace electronics systems require higher and higher levels of protection from radiated emissions. Glenairs fully shielded Micro-D cable assemblies meet this need. The cable shield is attached directly onto the one- ATS piece connector shell and secured with a stainless steel Band-Master clamp. These pre-wired, 100% tested assemblies meet the requirements of MIL-DTL-83513. An optional ground spring on the pin connector assures low shell-to-shell resistance. Available with a variety of wire types and shields, Micro-D shielded assemblies can be ordered in any length, either single-ended or back-to-back. Ground Spring and EMI Shielding Eecff tiveness A gold-plated stainless steel ground spring on the pin connector mating face offers substantial improvement in EMI protection. The graphs compare identical connectors tested with and without ground springs. EMI Performance with Ground Spring EMI Performance without Ground Spring 100 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 10 10 0 0 1.00E+031.00E+041.00E+051.00E+061.00E+071.00E+081.00E+09 1.00E+031.00E+041.00E+051.00E+061.00E+071.00E+081.00E+09 frequency (Hz) frequency (Hz) 2013 Glenair, Inc. High Performance Micro-D Connectors and Cables U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-14 E-Mail: sales glenair.com SHIELDING EFFECTIVENESS (Db) SHIELDING EFFECTIVENESS (Db) MWDM Micro-D Shielded Cable Assembly 177-710 (Untwisted Wire) and 177-740 (Twisted Wire Pairs) How To Order Shielded Micro-D Cable Assemblies Sample Part Number 177-710 -2 -25 P 4 K 1 -18 M A G Series 177-710 - Untwisted Wire 177-740 - Twisted Pair Wire Shell Material Aluminum Shell B and Finish 1 - Cadmium 2 - Electroless Nickel 5 - Gold 33 - Nickel-PTFE Contact Layout 9, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 75, 100, 130 P Pin (Single End Plug) S Socket (Single End Receptacle) Contact Type GP Double End Cable, Pin Connectors Both Ends GS Double End Cable, Socket connectors Both Ends CS Double End Cable, Pin and Socket Wire Gage (AWG) 4 - 24 6 - 26 8 - 28 0 - 30 (J wire type only) K Fluoropolymer Wire Per MIL-W-22759/11 (Not available in 30 gage) Wire Type J Cross-Linked Tefzel Wire Per MIL-W-22759/33 1 White (177-710 only) or White/Blue Twisted Pairs (177-740 Only) 5 Color-Coded Per MIL-STD-681, 24 and 26 gage only with up to 51 colors (177-710 only) Wire Color White/Blue Twisted Pairs (177-740 only) 7 Ten Color Repeating (177-710 only) Overall Length (In.) Example 18 = 18 inches 6 Inch (152 mm.) Minimum B No Mounting Hardware Installed F Float Mount, for Front Panel L Male Jackscrew, Allen Head, Non-Removable Mounting Hardware M Male Jackscrew, Allen Head, Low Profile Mounting P Female Jackpost R Float Mount, for Rear Panel Mounting S Male Jackscrew, Slot Head, Low Profile N No Shield, No Jacket A Braided Shield Installed (Nickel over Copper) C Braided Shield Installed (Nickel over Copper) With E-CTFE Halar Expando Jacket (+150 C.) D No Shield, With E-CTFE Halar Expando Jacket Installed (+150 C.) S 100% Braided AmberStrand Shield Installed Shield and Jacket Option T 100% Braided AmberStrand Shield Installed with E-CTFE Halar Expando Jacket (+150 C.) V 75% Braided AmberStrand Shield Installed Z 75% Braided AmberStrand Shield Installed with E-CTFE Halar Expando Jacket (+150 C.) W ArmorLite Braided Microfiliment Stainless Steel Shield Installed X ArmorLite Braided Microfiliment Stainless Steel Shield Installed with E-CTFE Halar Expando Jacket (+150 C) Ground Spring Option* N No Ground Spring G Ground Spring Installed (Pin Connectors Only) *Ground spring cannot be used with cadmium plating Table I: Mounting Hardware B P M S L F R Thru-Hole, Female Jackpost Hex Head Slot Head Hex Head Jackscrew Float Mount for Float Mount No Mounting Jackscrew Jackscrew Non- Removable Front Panel for Rear Panel Hardware Mounting Mounting 2013 Glenair, Inc. High Performance Micro-D Connectors and Cables U.S. CAGE Code 06324 Rec. 090117 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-15 E-Mail: sales glenair.com Rev. 01.07.21 Micro-D Harness