311
311-002
Lamp-Base Thread EMI/RFI Shrink Boot Adapter
with Strain Relief and Optional Shrink Boot
Direct Coupling - Low Profile
311 F A 002 M 16 03 E T
CONNECTOR
DESIGNATORS Shrink Boot (Table IV -
Product Series
Omit for none)
*
Connector Designator
A-B -C-D-E-F
E = Strain Relief
(Omit for nut)
Angle and Profile
G-H-J-K-L-S
A = 90
Cable Entry (Table IV, V)
B = 45
* Conn. Desig. B See Note 5
S = Straight
DIRECT
Shell Size (Table I)
COUPLING
Basic Part No.
Finish (Table II)
J
G
(Table III)
(Table IV)
J E
(Table III) (Table IV)
F (Table IV)
B
B
(Table I)
(Table I)
H
(Table IV)
Max.
Cable
Diameter
Max.
K (Table IV)
Cable
Cable L
Diameter
Range (Table V)
K
(Table IV)
STYLE E
STRAIN RELIEF
Length
Length
(Table VI)
A Thread
(Table VI)
O-Ring
TABLE II - STANDARD FINISHES
(Table I)
GLENAIR
SYMBOL FINISH
B Cadmium Plate, Olive Drab
Max.
B
M
Electroless Nickel
K (Table IV)
Cable
NF Cadmium Plate, Olive Drab Over
(Table I)
Diameter
Electroless Nickel
See Inside Back Cover for Complete Finish Infor-
mation and Additional Finish Options
STYLE 2
STYLE 1
(STRAIGHT
See Note 4)
2005 Glenair, Inc. CAGE Code 06324 Rev. 11.17.16 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com E-Mail: sales@glenair.com
Series 311 - Page 8311-002
Lamp-Base Thread EMI/RFI Shrink Boot Adapter
with Strain Relief and Optional Shrink Boot
Direct Coupling - Low Profile
TABLE III: FRONT ADAPTER
J Max - Conn. Designator
See inside back cover fold-out
Shell A-E-F
or pages 13 and 14
Size J-H-L-S D-B-G-K C
for unabridged Tables I and II.
08/09 1.180 (30.0) 1.250 (31.8)
10/11 1.180 (30.0) 1.250 (31.8)
1. Cable Entry or range is defined as the accomodation range
12/13 1.180 (30.0) 1.250 (31.8) 1.735 (44.1)
for the wire bundle or cable. Dimensions shown are not
14/15 1.180 (30.0) 1.250 (31.8) 1.915(48.6)
intended for inspection criteria.
16/17 1.380 (35.0) 1.560 (39.6) 1.915(48.6)
2. See Shrink Boot Reference Information (page 40).
18/19 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
3. Metric dimensions (mm) are indicated in parentheses.
20/21 1.380 (35.0) 1.560 (39.6) 1.915(48.6)
4. When maximum entry (page 21) is exceeded, Style 2 will
22/23 1.380 (35.0) 1.560 (39.6) 1.915(48.6)
be supplied. (Function S only)
24/25 1.380 (35.0) 1.560 (39.6) 1.915(48.6)
5. When using Connector Designator B refer to pages 18 and
28/29 1.610 (40.9) 1.560 (39.6) 1.915 (48.6)
19 for part number development.
32/33 1.610 (40.9) 1.750 (44.5) 1.915(48.6)
6. Shrink boot is not applicable for strain relief option. Please
36 1.610 (40.9) 1.750 (44.5) 1.915 (48.6)
consult factory.
40 1.610 (40.9) 2.190 (55.6) 1.915 (48.6)
TABLE IV: CABLE ENTRY/DIMENSIONS
Dash E F G H K Max Cable Shrink
No. Max Max Max Max Max Diameter Boot
01 .457 (11.6) 1.630 (41.4) .500 (12.7) 1.640 (41.7) .448 (11.4) .125 (3.2) 770-003S111
02 .457 (11.6) 1.630 (41.4) .500 (12.7) 1.640 (41.7) .515 (13.1) .250 (6.4) 770-003S112
03 .520 (13.2) 1.690 (42.9) .595 (15.1) 1.760 (44.7) .640 (16.3) .375 (9.5) 770-001S103
04 .582 (14.8) 1.750 (44.5) .610 (15.5) 1.780 (45.2) .765 (19.4) .500 (12.7) 770-001S103
05 .645 (16.4) 1.840 (46.7) .700 (17.8) 1.850 (47.0) .920 (23.4) .625 (15.9) 770-001S104
06 .738 (18.7) 1.950 (49.5) .885 (22.5) 1.940 (49.3) 1.015 (25.8) .750 (19.1) 770-001S104
07 .926 (23.5) 2.140 (54.4) .975 (24.8) 2.110 (53.6) 1.140 (29.0) .875 (22.2) 770-001S105
08 .926 (23.5) 2.290 (58.2) .975 (24.8) 2.220 (56.4) 1.265 (32.1) 1.000 (25.4) 770-001S106
09 1.020 (25.9) 2.290 (58.2) 1.125 (28.6) 2.220 (56.4) 1.432 (36.4) 1.125 (28.6) 770-001S107
10 1.020 (25.9) 2.290 (58.2) 1.125 (28.6) 2.220 (56.4) 1.515 (38.5) 1.250 (31.8) 770-001S107
11 1.145 (29.1) 2.340 (59.4) 1.225 (31.1) 2.390 (60.7) 1.640 (41.7) 1.375 (34.9) 770-001S107
12 1.207 (30.7) 2.440 (62.0) 1.575 (40.0) 2.640 (67.1) 1.765 (44.8) 1.500 (38.1) 770-001S107
13 1.238 (31.4) 2.530 (64.3) 1.775 (45.1) 2.640 (67.1) 2.015 (51.2) 1.750 (44.5) 770-001S108
TABLE V: CABLE ENTRY/DIMENSIONS
TABLE VI: LENGTH
Dash L Length (Max)
Cable Range Conn.
No. Max Min Max
Desig. Style 1 Style 2
01 .781 (19.8) .062 (1.6) .125 (3.2)
A 1.750 (44.5) 2.000 (50.8)
02 .968 (24.6) .125 (3.2) .250 (6.4)
B 1.630 (41.4) 1.880 (47.8)
03 1.046 (26.6) .250 (6.4) .375 (9.5)
C 2.130 (54.1) 2.380 (60.5)
04 1.156 (29.4) .312 (7.9) .500 (12.7)
D 1.630 (41.4) 1.880 (47.8)
05 1.219 (31.0) .437 (11.1) .625 (15.9)
E 1.250 (31.8) 1.500 (38.1)
06 1.343 (34.1) .562 (14.3) .750 (19.1)
F 1.250 (31.8) 1.500 (38.1)
07 1.469 (37.3) .687 (17.4) .875 (22.2)
G 1.750 (44.5) 2.000 (50.8)
08 1.594 (40.5) .812 (20.6) 1.000 (25.4)
H 1.750 (44.5) 2.000 (50.8)
09 1.719 (43.7) .937 (23.8) 1.125 (28.6)
J 1.250 (31.8) 1.500 (38.1)
10 1.844 (46.8) 1.062 (27.0) 1.250 (31.8)
K 2.130 (54.1) 2.380 (60.5)
L 1.380 (35.1) 1.630 (41.4)
S 1.750 (44.5) 2.000 (50.8)
2005 Glenair, Inc. CAGE Code 06324 Rev. 11.17.16 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com E-Mail: sales@glenair.com
Series 311 - Page 9
311