390HA011NF2508L Glenair

39 390-011 Splash-Proof EMI/RFI Cable Sealing Backshell Light-Duty with Strain Relief Type C - Rotatable Coupling - Low Profile 390 F S 011 M 16 05 L 6 CONNECTOR Product Series Length: S only DESIGNATORS (1/2 inch increments: Connector e.g. 6 = 3 inches) A-F-H-L-S Designator Strain Relief Style (L, G) ROTATABLE Angle and Profile COUPLING A = 90 Cable Entry (Table IV) B = 45 S = Straight Shell Size (Table I) TYPE C OVERALL SHIELD TERMINATION Basic Part No. Finish (Table II) Length * .312 (7.9) A Thread Length .060 (1.52) Max Minimum Order Length 2.0 Inch (Table I) O-Rings (See Note 4) * Length .060 (1.52) C Typ. Minimum Order (Table I) Length 1.5 Inch (See Note 4) G E (Table III) (Table III) STYLE 2 (STRAIGHT See Note 1) .88 (22.4) F (Table III) Max H (Table III) STYLE 2 (45 & 90 See Note 1) Now Available with the NESTOR STYLE L STYLE G Glenairs Non-Detent, Light Duty Light Duty Spring-Loaded, Self- (Table IV) (Table IV) Locking Coupling. Add -445 to Specify .072 (1.8) .850 (21.6) This AS85049 Style N Max Max Coupling Interface. Cable Cable L K Range Range 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 39 - Page 38390-011 Splash-Proof EMI/RFI Cable Sealing Backshell Light-Duty with Strain Relief Type C - Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size E F G H Conn. Desig. H A-F-L-S Max Max Max Max 08 09 .500 (12.7) 1.698 (43.1) 10 11 .520 (13.2) 1.748 (44.4) .595 (15.1) 1.818 (46.2) 12 13 .582 (14.8) 1.808 (45.9) .610 (15.5) 1.838 (46.7) 14 15 .645 (16.4) 1.898 (48.2) .700 (17.8) 1.908 (48.5) 16 17 .738 (18.7) 2.008 (51.0) .885 (22.5) 1.998 (50.7) 18 19 .926 (23.5) 2.198 (55.8) .975 (24.8) 2.168 (55.1) 20 21 .926 (23.5) 2.198 (55.8) .975 (24.8) 2.168 (55.1) 22 23 1.020 (25.9) 2.348 (59.6) 1.125 (28.6) 2.278 (57.9) 24 25 1.020 (25.9) 2.348 (59.6) 1.125 (28.6) 2.278 (57.9) 28 1.145 (29.1) 2.398 (60.9) 1.225 (31.1) 2.448 (62.2) 32 1.207 (30.7) 2.498 (63.4) 1.575 (40.0) 2.698 (68.5) 36 1.238 (31.4) 2.588 (65.7) 1.775 (45.1) 2.698 (68.5) TABLE IV: CABLE ENTRY Dash K L Cable Range No. Max Max Min Max 01 .781 (19.8) .593 (15.1) .062 (1.6) .125 (3.2) 02 .968 (24.6) .718 (18.2) .125 (3.2) .250 (6.4) 03 1.046 (26.6) .843 (21.4) .250 (6.4) .375 (9.5) 04 1.156 (29.4) .968 (24.6) .375 (9.5) .500 (12.7) 05 1.218 (30.9) 1.109 (28.2) .500 (12.7) .625 (15.9) 06 1.343 (34.1) 1.218 (30.9) .625 (15.9) .750 (19.1) 07 1.468 (37.3) 1.343 (34.1) .750 (19.1) .875 (22.2) 08 1.593 (40.5) 1.468 (37.3) .875 (22.2) 1.000 (25.4) 09 1.718 (43.6) 1.593 (40.5) 1.000 (25.4) 1.125 (28.6) 10 1.843 (46.8) 1.718 (43.6) 1.125 (28.6) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Interface O-Ring not supplied with Connector Designator A. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 39 - Page 39 39