40
400-001
TAG Ring Backshell
with Strain Relief
Rotatable Coupling - Low Profile
400 F S 001 M 16 06 L 6
CONNECTOR
Product Series Length: S only
DESIGNATORS
(1/2 inch increments:
Connector e.g. 6 = 3 inches)
A-F-H-L-S
Designator
Strain Relief Style (F, G, L)
ROTATABLE
Angle and Profile
COUPLING
A = 90 Cable Entry (Table IV, V)
B = 45
S = Straight Shell Size (Table I)
Basic Part No. Finish (Table II)
Length *
A Thread
Ground
Length .060 (1.52)
(Table I)
Spring
Minimum Order Length 1.5 Inch
(See Note 4)
* Length
.060 (1.52)
C Typ.
Minimum Order
(Table I)
Length 1.0 Inch
(See Note 4)
Shown with Style G Nut
Add -445 to Specify Glenairs Non-Detent,
STYLE 2
NESTO) Spring-Loaded, Self-Locking Coupling.
(STRAIGHT
See Page 41 for Details.
See Note 1)
E
G
(Table III)
(Table III)
.88 (22.4)
Max
F (Table III)
H (Table III)
STYLE 2
(45 & 90 Shown with Style L
See Note 1) Strain Relief
STYLE F STYLE G STYLE L
Light Duty Light Duty Light Duty
(Table V) (Table IV) (Table V)
.416 (10.5)
.072 (1.8)
.850 (21.6)
Approx.
Approx. Approx.
Cable
Cable
Cable
L
K
L
Entry
Range
Range
2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
Series 40 - Page 4400-001
TAG Ring Backshell
with Strain Relief
Rotatable Coupling - Low Profile
See inside back cover
fold-out or pages 13 and
14 for Tables I and II.
TABLE III: ELBOW DIMENSIONS
Shell Size
E F G H
Conn. Desig.
H
A-F-L-S Max Max Max Max
08 09 .457 (11.6) 1.660 (42.2) .500 (12.7) 1.670 (42.4)
10 11 .520 (13.2) 1.720 (43.7) .595 (15.1) 1.790 (45.5)
12 13 .582 (14.8) 1.780 (45.2) .610 (15.5) 1.810 (46.0)
14 15 .645 (16.4) 1.870 (47.5) .700 (17.8) 1.880 (47.8)
17
16 .738 (18.7) 1.980 (50.3) .885 (22.5) 1.970 (50.0)
18 19 .926 (23.5) 2.170 (55.1) .975 (24.8) 2.140 (54.4)
20 21 .926 (23.5) 2.170 (55.1) .975 (24.8) 2.140 (54.4)
22 23 1.020 (25.9) 2.320 (58.9) 1.125 (28.6) 2.250 (57.2)
24 25 1.020 (25.9) 2.320 (58.9) 1.125 (28.6) 2.250 (57.2)
28 1.145 (29.1) 2.370 (60.2) 1.225 (31.1) 2.420 (61.5)
32 1.207 (30.7) 2.470 (62.7) 1.575 (40.0) 2.670 (67.8)
36 1.238 (31.4) 2.560 (65.0) 1.775 (45.1) 2.670 (67.8)
TABLE IV: CABLE ENTRY TABLE V: CABLE ENTRY
Cable Range
Dash K Cable Entry Dash L
No. Max Max No. Max Min Max
02 .545 (13.8) .250 (6.4) 02 .968 (24.6) .125 (3.2) .250 (6.4)
03 .670 (17.0) .375 (9.5) 03 1.046 (26.6) .250 (6.4) .375 (9.5)
04 .795 (20.2) .500 (12.7) 04 1.156 (29.4) .250 (6.4) .500 (12.7)
05 .920 (23.4) .625 (15.9) 05 1.218 (30.9) .375 (9.5) .625 (15.9)
06 1.045 (26.5) .750 (19.1) 06 1.343 (34.1) .500 (12.7) .750 (19.1)
07 1.170 (29.7) .875 (22.2) 07 1.468 (37.3) .625 (15.9) .875 (22.2)
08 1.295 (32.9) 1.000 (25.4) 08 1.593 (40.5) .625 (15.9) 1.000 (25.4)
09 1.420 (36.1) 1.125 (28.6) 09 1.718 (43.6) .750 (19.1) 1.125 (28.6)
10 1.670 (42.4) 1.250 (31.8) 10 1.843 (46.8) .875 (22.2) 1.250 (31.8)
1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied.
Dimensions E, F, G and H will not apply. Please consult factory.
2. Metric dimensions (mm) are indicated in parentheses.
3. Cable range is defined as the accommodations range for the wire bundle or cable.
Dimensions shown are not intended for inspection criteria.
4. Consult factory for shorter lengths on straight backshells.
2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
Series 40 - Page 5
40