770-001S104R Glenair

770-001 Shrink Boot Heat Shrink Molded Part Adhesive Lined Angular Function W1 - Zero Halogen A - 90 W2 - 80C Hot Melt B - 45 Part Size R - 150C Epoxy Pre-Coat Product Series S - Straight (See Table I) (Omit for No Adhesive) 770 - 001 A 1 00 W1 Material Basic Part Number 1 - 150C Compound 2025 Elastomeric 001 - Lipped Boot with Eyelet Oil Resistant and Flame Retardant 002 - Short Lipped Boot with Eyelet 2 - Low Smoke Hazard Material 003 - Lipped Boot 3 - Flexible Polyolefin 004 - Short Lipped Boot 005 - Non-Lipped Boot Ce Ae Ce Ae As Supplied S - Straight As Supplied P1 P0 Shrink Boot .079 (2.0) Ref R0 (See Note 3) Cr Ar Cr Ar Ct C0 At Ct Recovered (-002) C0 At Recovered (-001) TABLE I: STRAIGHT BOOT DIMENSIONS, BOOT AND SHELL SIZE Boot Shell Ae Dia Ce Dia Ar Dia at Cr Dia ct CO PO P1 RO Size Size Min Min Max 30% Max 20% Ref 10% 10% Ref .354 (9.0) .354 (9.0) .217 (5.5) .039 (1.0) .079 (2.0) .028 (0.7) .295 (7.5) .984 (25.0) N/A .551 (14.0) 00 5 .472 (12.0) .472 (12.0) .276 (7.0) .043 (1.1) .118 (3.0) .028 (0.7) .295 (7.5) .984 (25.0) N/A .551 (14.0) 01 5, 6 .669 (17.0) .669 (17.0) .276 (7.0) .051 (1.3) .138 (3.5) .028 (0.7) .395 (10.0) 1.181 (30.0) N/A .728 (18.5) 02 6, 7 03 8, 10 .945 (24.0) .945 (24.0) .413 (10.5) .063 (1.6) .197 (5.5) .035 (0.9) .395 (10.0) 1.496 (38.0) 1.024 (26.0) .748 (19.0) 04 11-16 1.181 (30.0) 1.181 (30.0) .551 (14.0) .071 (1.8) .236 (6.0) .039 (1.0) .630 (16.0) 2.165 (55.0) 1.693 (43.0) 1.181 (30.0) 05 16-17 1.260 (32.0) 1.260 (32.0) .709 (18.0) .071 (1.8) .276 (7.0) .047 (1.2) .748 (19.0) 2.638 (67.0) 1.850 (47.0) 1.299 (33.0) 06 17-21 1.417 (36.0) 1.417 (36.0) .886 (22.0) .079 (2.0) .335 (8.5) .047 (1.2) .787 (20.0) 3.150 (80.0) 2.362 (60.0) 1.575 (40.0) 07 21-23 1.693 (43.0) 1.693 (43.0) 1.102 (28.0) .087 (2.2) .394 (10.0) .051 (1.3) 1.142 (29.0) 3.898 (99.0) 3.150 (80.0) 2.165 (55.0) H 08 25 2.362 (60.0) 2.362 (60.0) 1.378 (35.0) .130 (3.3) .591 (15.0) .063 (1.6) 1.575 (40.0) 5.118 (130.0) 4.331 (110.0) 1.969 (50.0) APPLICATION NOTES 1. Material: Fluid resistant elastomer - Glenair Material Type 1. 2 2. When the minimum number of conductors are used, wire bundle/cable may require build-up to B max. 3. Sizes 00 to 02 do not contain eyelet. 2010 Glenair, Inc. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com H-5 Connector AccessoriesConnector Accessories 770-001 90 Shrink Boot Heat Shrink Molded Part P C0 Ct Cr Ae Ce R .079 (2.0) Ref As Supplied At Ar Size 03 To 08 Recovered A - 90 Shrink Boot TABLE I: 90 BOOT DIMENSIONS, BOOT AND SHELL SIZE Boot Shell Ae Dia Ce Dia Ar Dia at Cr Dia ct CO P R Size Size Min Min Max 30% Max 20% Ref 20% Ref 03 9 .945 (24.0) .945 (24.0) .394 (10.0) .063 (1.6) .197 (5.0) .035 (0.9) .394 (10.0) .984 (25.0) .984 (25.0) 04 11-15 1.181 (30.0) 1.181 (30.0) .532 (13.5) .071 (1.8) .217 (5.5) .039 (1.0) .472 (12.0) 1.260 (32.0) 1.063 (27.0) 05 13-17 1.260 (32.0) 1.260 (32.0) .709 (18.0) .071 (1.8) .276 (7.0) .047 (1.2) .591 (15.0) 1.535 (39.0) 1.260 (32.0) 06 17-21 1.417 (36.0) 1.417 (36.0) .886 (22.0) .079 (2.0) .335 (8.5) .047 (1.2) .630 (16.0) 1.929 (49.0) 1.496 (38.0) 07 21-23 1.693 (43.0) 1.693 (43.0) 1.102 (28.0) .087 (2.2) .394 (10.0) .059 (1.5) .709 (18.0) 2.165 (55.0) 1.850 (47.0) 08 23-25 2.165 (55.0) 2.165 (55.0) 1.378 (35.0) .130 (3.3) .591 (15.0) .079 (2.0) 1.260 (32.0) 3.150 (80.0) 2.165 (55.0) H 2010 Glenair, Inc. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com H-6