770-007S2 Type 2 Zero Halogen Straight Lipped Adapter Shrink Boots, High Ratio Type 2 Low Smoke Zero Halogen (LSZH) For Regulated Environmental Safety Applications Straight lipped high ratio boots are used when the cable or wire bundle is much smaller diameter than the adapter. Halogen-free semi-efl xible polyolenfi meets low smoke and toxicity requirements of shipboard, transit and aircraft systems. These Low Smoke/Zero Halogen (LSZH) boots fit most standard shrink boot adapters, including AS5258 types along with Glenair Series 31 and Series 44 adapters. Oxygen index greater than 30%, smoke index less than 20, and toxicity index under 3 per 100 grams. Material meets requirements of NAVSEA 5617649, VG95343 Part 29, BSG 198-5-DF, B EN62329-101 and SAE AS5258 Type G. Good resistance to oils, fuels and solvents. Available with high temperature hot melt adhesive lining, these boots provide strain relief and environmental protection to connector/cable transitions. Temperature rating -30 to +125 C. Black color. Part Number Low Smoke, Zero Halogen Pre-Coated with W1 Pre-Coated with W2 Boot Hi-Temp Hot-Melt Standard Hot-Melt Pre-Coated with R Meets U.S. and E.U. toxicity Size No Adhesive Lining Adhesive Adhesive Epoxy Adhesive requirements. 770-007S203 770-007S203W1 770-007S203W2 770-007S203R 03 770-007S204 770-007S204W1 770-007S204W2 770-007S204R 04 -30 C to +135 C 770-007S206 770-007S206W1 770-007S206W2 770-007S206R 06 770-007S207 770-007S207W1 770-007S207W2 770-007S207R 07 770-007S3 Type 3 Flexible Polyloefin Straight Lipped Adapter Shrink Boots, Long Tail Type 3 Flexible Polyolefin For General Duty Applications Straight lipped high ratio boots are used when the cable or wire bundle is much smaller diameter than the adapter. Economical efl xible polyolenfi boots tfi standard M85049 shrink boot adapters, Glenair Series 31 and Series 44 adapters. These self-extinguishing boots meet the requirements of SAE AS81765/1 Type 1. Good resistance to oils and fuels. Available with optional hot melt adhesive lining, these boots provide strain relief and environmental protection to connector/ cable transitions, and are ideally suited for heat-sensitive cables due to the material s low heat shrink temperature of +100 C. Temperature rating -55 to +135 C. Black color. Part Number General purpose harnessing Pre-Coated with W2 Boot Standard Hot-Melt Economical, flexible Size No Adhesive Lining Adhesive 03 770-007S303 770-007S303W2 -55 C to +135 C 04 770-007S304 770-007S304W2 06 770-007S306 770-007S306W2 07 770-007S307 770-007S307W2 Dimensions in inches (millimeters) and are subject to change without notice. 2012 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com B-21 Lipped StraightX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Heat Shrink Tubing and Sleeves category: Click to view products by Glenair manufacturer: Other Similar products are found below : 770-006S102 5685710001 CR8248-000 CR9960-000 603312-4 607381P039 611112-000 617867N001 6500750004 CZ1420-000 D-306-38 770-003S106W2 770-005S105W1 770-005S106W1 770-007A303 770-010Y106W1 770-010Y706W1 7771210001 MFP-1/4 -Clear MFP- 3/64 -Clear 790-3012 MFT-MT2000-NO.14-0-SP MHHT-4-15K2-G-104 MIL-LT-1-1/2-4-SP MIL-LT-1-1/2-9-STK MIL-LT-1/2-2-STK MIL-LT-3-0-SP MIL-LT-3/32-0-SP MIL-LT-3/32-6-SP MIL-LT-3/4-6-SP MIL-LT-3/8-0-SP 8159270001 839602-000 8423-6 FP301-116- 6 -Black FP301-1/2-48 -Black FP301-12-48 -Black-Hdr FP301-1/4-48 -Black FP301-1/4-48 -White-Hdr FP301-1-6 -Clear FP301-18-48 - Black-Hdr FP301-1/8-6 -Black FP301-18-6 -Black-Bulk FP301-316-48 -Blue-Hdr FP301-316-6 -Clear FP301-332-6 -Black 912229N002 120-126-16BL 121-001-09 121-018-32