Product Information


67C08-8-M-020C electronic component of Grayhill

Joysticks 67C08-8-M-020C

Manufacturer: Grayhill
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges

Price (USD)

1: USD 108.7903 ea
Line Total: USD 108.7903

1 - Global Stock
Ships to you between
Fri. 29 Sep to Thu. 05 Oct
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
1 - Global Stock

Ships to you between Fri. 29 Sep to Thu. 05 Oct

MOQ : 1
Multiples : 1

Stock Image


1 : USD 110.0794
10 : USD 104.5669
25 : USD 96.4819
50 : USD 91.665
100 : USD 85.2075
250 : USD 65.8087

Product Category
Hall Effect Joystick
Voltage Rating
5 V
Current Rating
8 mA
For Use With
Aerospace, Avionics, Entertainment Equipment, Global Positioning / Driver Information Systems, Medical Equipment Controls, Radio Control Belly Boxes, Robotics, Security Camera Controls
Analog Joystick Outputs Are Propotional To Angle Of Shaft Deflection, Cable With Connector Termination, Choices Of Cable Length, High Reliability, Joystick With Integrated Pushbutton And Optical Encoder, Long Life, Propotional Joystick, Pushbutton And Optical Encoder Functions From A Single Shaft
Product Type
Input Devices
Input Devices
Hts Code
Show Stocked Products With Similar Attributes. LoadingGif
Image Description
02-24 electronic component of Grayhill 02-24
Conn Test Clip PL 1 POS ST Panel Mount 1 Port
Stock : 4
04J-AS-C01 electronic component of Grayhill 04J-AS-C01
Stock : 1
05004-03N electronic component of Grayhill 05004-03N
Rotary Switches Rotary Switch,3 position, non-shorting
Stock : 1
04J-BS-C12 electronic component of Grayhill 04J-BS-C12
Stock : 1
08A36-01-1-02S electronic component of Grayhill 08A36-01-1-02S
Rotary Switches Rotary Switch,Standard, 36°, 1 deck, 1 pole/deck, 2 positions/pole, shorting
Stock : 1
09A30-01-1-03N electronic component of Grayhill 09A30-01-1-03N
Rotary Switches Rotary Switch,Standard 30°, 1 deck, 1 pole/deck, 3 positions/pole, non-shorting
Stock : 1
02-0 electronic component of Grayhill 02-0
Test Clips Hardware Standard Threaded stud
Stock : 267
04J-AP-T02 electronic component of Grayhill 04J-AP-T02
Stock : 1
08S36-04-1-10N electronic component of Grayhill 08S36-04-1-10N
Rotary Switches Rotary Switch,Standard, shaft/panel seal, 36°, 4 deck, 1 pole/deck, 10 positions/pole, non-shorting
Stock : 1
083191-1-03N electronic component of Grayhill 083191-1-03N
Rotary Switches Rotary Switch,Standard, 36°, 1 deck, 1 pole/deck, 3 positions/pole, non-shorting, 08A36-01-1-03N
Stock : 1
Image Description
M11L061M electronic component of Apem M11L061M

Joysticks 2axis 5kohm 56deg Straight Tip Shrt
Stock : 1

CW-B1BK1A00A0 electronic component of Apem CW-B1BK1A00A0

Joysticks Mini Thumbwheel BLK 0V - 5Vout w/ tab
Stock : 41

NZAA0477 electronic component of Apem NZAA0477

Stock : 1

60A18-4-060C electronic component of Grayhill 60A18-4-060C

Joysticks Joystick Encoder Detent 18deg / 20Pos
Stock : 0

NZAA0475 electronic component of Apem NZAA0475

Stock : 10

TS-AA1U02A electronic component of Apem TS-AA1U02A

Joysticks Thmbstick Hndles 123 Mnt SngAx .5-4.5Vout
Stock : 1

67C18-8-M-040C electronic component of Grayhill 67C18-8-M-040C

Joysticks 67C18-8-M-040C
Stock : 1

60C22-M7-4-030C electronic component of Grayhill 60C22-M7-4-030C

Joysticks 60C22-M7-4-030C
Stock : 1

TW11BLK13 electronic component of Apem TW11BLK13

Switch Thumb-Pushwheel Thumbwheel Wire Lead Panel Mount
Stock : 0

G3-D12211 electronic component of OTTO G3-D12211

Stock : 1

Joysticks Specifications are subject to change. Please refer to the current datasheet on for the most current published specifications for this product. Joysticks SERIES 67C Hall Effect Joystick with Integrated Pushbutton & Optical Encoder FEATURES APPLICATIONS Proportional joystick, pushbutton & optical Global positioning / Driver encoder functions from a single shaft information systems Analog joystick outputs are proportional to Entertainment equipment angle of shaft deflection Medical equipment controls Long life, high reliability Radio control belly boxes Choices of cable length and termination Robotics Customized solutions available Aerospace Avionics Security camera controls DIMENSIONS in inches 87654321 MATING CONNECTOR AMP P/N 188275-8 OR EQUIVALENT JOYSTICK OUTPUT WAVEFORM Y + X - X + Y - CODE REPEATS EVERY 4 POSITIONS 20 POSITIONS PER REVOLUTION OUTPUT SHOWN IS TYPCIAL FOR VDD = 5.00V AND NOT NECESSARILY TO SCALE BEHAVIOR IS SHOWN FOR X-AXIS AS EXAMPLE BEHAVIOR OF Y-AXIS IS SAME AS X-AXIS Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.comJoysticks Specifications are subject to change. Please refer to the current datasheet on for the most current published specifications for this product. Joysticks SPECIFICATIONS General Electrical Specifications Operating Voltage on Pin 6 (VDD): 5.0 grams Dome) 100C 0.25V Pushbutton Travel: 0.025 0.010 inches Relative Humidity: 96 hours at 90-95% humidity at 40C Absolute Maximum Voltage* on Pin 6 Vibration: Harmonic motion with amplitude of (VDD): -0.3 V min, 6.5 V max. Rotary Electrical and Mechanical 15g, within a varied 10 to 2000 Hz frequency Operating Current: 8 mA typ., 12 mA, max. Ratings for 12 hours Output Code (Pins 4 & 5): 2-Bit quadrature: Mechanical Shock: Joystick Electrical and Mechanical Channel leads channel by 90 elec- Test 1: 100g for 6ms half-sine wave with a trically during clockwise rotation of the shaft Ratings velocity change of 12.3 ft/s Output Type: Push/Pull Sensing Method: Hall effect, proportional Test 2: 100g for 6ms sawtooth wave with a Output Low Voltage: 0.6V maximum for to angle of deflection velocity change of 9.7 ft/s IOL = 2 mA. Output Voltage (Pins 7 & 8): Analog (Ratio- Output High Voltage: 4.3V minimum for metric to Operating Voltage) Materials and Finishes IOH = -1.5 mA, (VDD = 5.0V) Output at Center Position: 50% VDD Pin Header: Terminals: Phosphor bronze Mechanical Life: 1 million rotational cycles Output at Full Travel: Insulator: Nylon 4/6 Plated with tin of operation (1 cycle is a rotation through all 10% VDD (for X-, Y- directions) Cable: Copper stranded with silver plating in positions and a full return) 90% VDD (for X+, Y+ directions) PVC insulation, 28 AWG Mounting Torque: 15 in-oz maximum Output Tolerance: 2% VDD (at Center Connector: Nylon 4/6 30% Glass-filled Tin- Shaft Push-Out Force: 45 lbs minimum and at Full Travel) plated phosphor bronze terminals Shaft Pull-Out Force: 45 lbs minimum Output Current: 200 A, max. Mounting Nut: Polyurethane Solderability: 95% free of pin holes and Angle of Throw: 6.5 + 2 / -1 in main Shaft: Thermoplastic voids directions 9.0 0.1 in diagonals ROHS Compliant. Detents: 20 Position Life: 500,000 actuations in each of the four Torque: Initially 3.5 1.5 in-oz average of all main directions EMC Ratings positions, with a 1.5 in-oz maximum range Radiated Immunity: Passed 10 V/m: 80-2700 (Max position - Min position) = Range Pushbutton Electrical and MHz per IEC 61000-4-3 After 1 million cycles, average torque shall Mechanical Ratings Conducted Immunity: Passed 10 V/m: 0.15 not change by more than 50% of the initial Rating: 10 mA at 5 Vdc resistive 80 MHz per IEC 61000-4-6 value Absolute Maximum Voltage* on Pins 2 & Radiated Emissions: Passed EN 55022 3: 6.0 V Soldering Recommendation Class B Contact Resistance: less than 10 ohms Hand solder only per IPC J-STD-001 Conducted Emissions: Passed EN 55022 Life: 1 million actuations minimum Class B Contact Bounce: < 4 mS make, <10 mS Environmental Ratings Electrostatic Discharge: Passed 15kV break Operating Temperature Range: -40C to contact/25kV air discharge per IEC 61000-4-2 Actuation Force: 960 150 grams (700 85C Power Frequency Magnetic Field: Passed Storage Temperature Range: -55C to 30 A/m per IEC 61000-4-8 * Exceeding the Absolute Maximum Voltage may result in permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operation listings of this specification is not implied. ORDERING INFORMATION BLOCK DIAGRAM CABLE LENGTH 020 = 2 040 = 4 060 = 6 2 Increments Leave blank if choosing pin header JOYSTICK DIRECTIONS Examples: 8 = 4 Sensors, 8 Directions 67C18-8-M-020 = 2.0 cable with connector (No Gating) 67C18-8-M-P = Pin header 67CXX-X-X-XXXX FORCE OPTION M = Medium Forces TERMINATION S = Stripped Cable ROTATIONAL ENCODER RESOLUTION C = Cable with Connector 18 = 18, 20 positions P = Pin Header 08 = Non-detent, 20 positions 00 = Non-turn For prices and custom configurations, contact a local sales office, an authorized distributor , or Grayhill s sales department. Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820

Tariff Desc

8471.60.00 -Input or output units, whether or not containing storage units in the same housing
55 No Keyboards
91 No Joystick/game pads
92 No Mouse/trackball
Grayhill Inc.