SUPER GLUE ALL PLASTICS STEP-BY-STEP 1. Ensure surfaces to be joined are clean, completely dry and close fitting. Using the Surface Activator like a pen apply it to both surfaces and wait 60 seconds to dry. 2. Twist the glue cap clockwise until it locks, then unscrew in an anti-clockwise direction to open. 3. Carefully squeeze a small drop onto one surface. Press the surfaces together and hold until set. 4. Replace the cap immediately and store upright in a cool dry place. Rapid dual-action adhesive system is specially designed to work on plastic to form resilient, invisible bonds in seconds. Recommended on Plastic, Porcelain, Metal, Rubber, Leather, Wood, Paper. Properties Bonds even difficult to bond plastics such as polyethylene (PE) and polypropylene (PP) Bonds in seconds Dries transparent Easy to open, self-piercing and anti-clog cap Suitable for use on most surfaces* Solvent free * Except Styropor, car glass and synthetic fibres. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Loctite manufacturer: Other Similar products are found below : 2003721 2701 5080,GREY 50M X 50MM 37684 GC 10 TYPE 4 (JAR) 97262 406 577, 250ML 603, 10ML 542, 250ML 330, 50ML & 7388, 40ML GLUE REMOVER, 5G 270, 50ML 262, 50ML 40945 98454 3526 SUPER GLUE GLASS, 3G 4080, 50G 460, 50G 641, 50ML 495, 50G 55, 160M 7360 LT 5075 242, 50ML 98472 GC 10 TYPE 3 (JAR) 660, 50ML 3463, 114G 595, 100ML 603, 50ML 2400, 50ML 270 983438 7386, 500ML 572, 50ML 8106, 1L 96001 496, 50G 243, 250ML 5400, 50ML 403, 50G 420, 20G 9464, 50ML 638, 50ML 496, 20G 1487439 3455, 24ML 4062, 20G