PC Card Socket Connector Complies with PC card Standard IC1 Series Features 1. Compliant with PC Card Standards Polarized entry prevents wrong insertion into a corresponding connector. And sequential contact engagement prevents electorostatic discharge,avoiding possible damage to sensitive board circuits. 2. Suited to Automatic Mounting Packaged for a board placement with aoutmated equipment. 3. Lead Offset Available with several board termination levels,to allow use of different height board components. In relation to the center line of connector,- 0.2mm,+0.3mm,+0.55mm,+0.9mm and terminations on board center are available. Product Specifications Current rating 0.5 A Operating temperature -55 to +85 (Note 1) Storage temperature -40 to +70 (Note 2) Ratings Operating humidity 95% R.H. max. Voltage rating 125 V AC Storage humidity 40% to 70% (Note 2) (No condensation) Item Specification Conditions 1. Insulation resistance 1000M min. 500 V DC 2. Withstanding voltage No flashover or insulation breakdown. 500 V AC / 1 minute 3. Contact resistance 40 m max. (initial value) (Note 3) 1 mA No electrical discontinuity of 100ns or Frequency: 10 to 2000 Hz, single amplitude of 1.52 mm or 4. Vibration 2 more acceleration of 147 m/s (peak), 4 hours in each of the 3 directions. 5. Humidity (Steady state) Insulation resistance: 100 M min. 96 hours at temperature of 40 and humidity of 90% to 95% -55, 30 min /15 to 30, within 5 min/85, 30 min 6. Temperature cycle No damage, cracks, or parts looseness. /15 to 35, within 5 min, for 5 cycles 7. Durability Change of contact resistance from the 10000 cycles at 400 to 600 cycles per hour (Insertion/withdrawal) start should be 20 m max. Reflow: At the recommended temperature profile 8. Resistance to No deformation of components soldering heat affecting performance. Manual soldering: 300 for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Materials Part Material Finish Remarks Insulator PPS Color : Black UL94V-0 IC1K,IC1HA:Phosphor bronze Contact Area : gold plating Contact ----------------- Others:Beryllium copper Lead Area : solder plating A73 Ordering Information - IC1 F - ** R D 1.27 SH 1 2 3 4 5 6 7 1 Series name : IC1 2 BB: Compliant with PC Card Standards Connector thickness: 2.8mm F: Compliant with PC Card Standards Connector thickness: 2.7mm HA: Compliant with PC Card Standards Connector thickness: 2.7mm Lead offset type K: Compliant with PC Card Standards Connector thickness: 2.7mm Suited to automatic mounting 3 Contacts: 40, 68 4 R: Card Connector 5 D: 2-row arrangement 6 Contact pitch: 1.27mm 7 Mounting method SH: Two sided board terminations SHA: Two sided board terminations SF: Single surface mount type. SFA: Single surface mount type. SFB: Single surface mount type. 68 Contacts Card Connectors Connector thickness : 2.7mm Lead offset type Suited to automatic mounting Single surface mount type IC1K-68RD-1.27SFA CL640-0047-2 BPCB mounting pattern Unit:mm Part Number CL No. A B C IC1K-68RD-1.27SF 640-0046-0 2 0.3 5 IC1K-68RD-1.27SFA 640-0047-2 2 0.9 5 IC1K-68RD-1.27SFB 640-0048-5 3 ------- 6 A74