EVN2000 Series Limit Switch Features Benefits Innovative wiring system featuring insulation Reduced wiring time, up to 50 % savings can be displacement termination (IDT) achieved Integrated cable gland/cord grip Provides a truly global product by removing the need for conduit or cable gland hardware EN 50047 mounting compatible Meets globally accepted mounting standard Designed to meet switch requirement within EN 81-1 Meets switch requirements within Safety rules for the construction and installation of elevators/lifts Snap action basic switch with 4 mm air gap 1 Normally Closed, 1 Normally Open circuit conforming to EN 81-1 IP 66/67 Enclosure rating, EN 60529. NEMA 1, 12, 13 Suitable for wet applications Direct opening of Normally Closed contacts Forced opening of the normally closed circuit in the conforming to IEC/EN 60947-5-1 annex K event of contacts welding Double insulated switch element No earth connection required, internal or external Compact plastic housing Suitable where space is at a premium Description Typical applications The EVN2000 series limit switch is an innovative Elevators and moving stairs product which has been developed to address a need Scissor/platform lifts highlighted by Original Equipment Manufacturers Overhead doors (OEM), where Ease of Wiring is required. With the Material handling new design there is no need for access to the inside of the housing and therefore the housing cover, cover Packaging machinery screws and gasket become obsolete. Furthermore, the Agricultural equipment integrated cable gland eliminates the need for additional conduit or cable gland hardware. WARNING IF USED IN APPLICATIONS CONCERNING HUMAN SAFETY Only use NC direct opening (positive opening/ posi- tive break) contacts, identified by the symbol . WARNING Do NOT use flexible / adjustable actuators. Only use MISUSE OF DOCUMENTATION actuators designed for safety applications. The information presented in this product sheet (or Do NOT defeat, tamper, remove, or bypass this switch. catalogue) is for reference only. DO NOT USE this Hazardous voltage, disconnect power before servicing. document as product installation information. Strictly adhere to all installation instructions. Complete installation, operation and maintenance Consult with local safety agencies and their require- information is provided in the instructions supplied ments when designing a machine-control link, interface with each product. and all control elements that affect safety. Failure to comply with these instructions could Failure to comply with these instructions could result in death or serious injury. result in death or serious injury. Sensing and ControlEVN2000 Series Limit Switch Technical information Specifications Mechanical life: up to 10 million operations Degree of protection: IP 66/67, EN 60529 NEMA/UL type 1, 12, 13 Operating temperature: -25 C to 85 C (-13 F to 185 F) Storage temperature: -40 C to 85 C (-40 F to 185 F) Standards/approvals: IEC/EN 60947-5-1 - European standard for electromechanical industrial control equipment EN 50047 - European standard for designing limit switches UL 508 - US standard for industrial control equipment UL 746C - US standard for plastic enclosures EN 60529 - European standard for IP codes EN 81-1 - European standard for electrical lifts Electrical rating: Rated operational current Ie (A) VA IEC/EN 60947-5-1 at rated operational voltage Ue rating 120 V 240 V Make Break AC15, A300 6 3 7200 720 125 V 250 V DC13, Q300 0.55 0.27 69 69 Rated insulation voltage : (Dielectric) 320 V Rated impulse withstand: 2500 V Polution degree: 3 Thermal current: 10 A Short circuit withstand: SCPD 10 A quick acting fuse (IEC 269.1 gG-type) Contact material: Silver Circuit type: 1NO/1NC Direct opening Single pole, single throw, double break Contact type Zb - the 2 contact elements are electrically separated Cable/leadwire: Outside cable 6.0 mm to 9.0 mm (0.24 in to 0.35 in) Leadwire 0,75 mm to 1,5 mm (16-18 AWG) Shock: 50 g conforming to IEC 68-2-27 (BS 2011, Part 2.1 Ea) (actuator not fitted) Vibration: 10 g conforming to IEC 68-2-6 (BS 2011, Part 2.1 Fc) (actuator not fitted) Bump: 40 g conforming to IEC 68-2-29 (BS 2011, Part 2 LeB) Order guide Description Catalogue Listing Side Rotary Lever EVN2000A Top Pin Plunger EVN2000B Top Roller Plunger, Parallel EVN2000C Top Roller Plunger, Perpendicular EVN2000D 2 Honeywell Sensing and Control