HUBER+SUHNER RF CABLE ASSEMBLIES DATASHEET MULTI-PORT Jumper 1 / 2 LIS-C5X-11MQ5X-5x11NXX-XXXXX-53 Cable: 5x SUCOFEED 1/4 HFX (High Flex, X = cross linked) Connectors: 1x straight male MQ4X(screw/HEX.nut) + 5x straight male NEX10(X=screw/HEX.nut) Description Multi Coax Assembly consisting of corrugated 1/4 high flex (X, cross linked) coaxial cable with connectors 1x straight male MQ5X and 5x straight male NEX10(X) for frequencies DC to 6 GHz. Mechanical Diagram View A Port Assignment Port No. Cable No. Label Printing 1 X1 ANT 1 2 X2 ANT 2 3 X3 ANT 3 4 X4 ANT 4 5 X5 CAL List of Components Pos Components Description Type 1 Cable type Corrugated 1/4 High Flex cross linked with PE jacket SUCOFEED 1/4 HFX 2 Connector type MQ5X straight male screw version 11 MQ5-50-5-X1 3 Connector type NEX10(X) straight male (5x) LIS11 NEX10-50-5-XSTD 4,5 Marking See Marking and Packing section Electrical Data (values per single cable) Impedance 50 Frequency: 6 GHz (max. operating) Frequency Up to 5m Frequency Up to 5m Return loss DC - 1.00 GHz 28 dB 3.30 - 4.20 GHz 21 dB 1.70 - 2.20 GHz 26.5 dB 4.40 - 5.00 GHz 19 dB 2.20 - 2.70 GHz 25 dB 5.15 - 5.95 GHz 17 dB -155 dBc (typical: -163 dBc) / at 1.8 GHz or alternative at 0.9 GHz Intermodulation IM3 (2x20W) 0.5 m 1.0 m 1.5 m 2.0 m 2.5 m 3.0 m 4.0 m 5.0 m Length DC 1.00 GHz 0.14 dB 0.25 dB 0.36 dB 0.47 dB 0.57 dB 0.68 dB 0.90 dB 1.12 dB Max. 0.20 dB 0.37 dB 0.54 dB 0.71 dB 0.88 dB 1.05 dB 1.39 dB 1.73 dB up to 2.20 GHz Attenuation 0.22 dB 0.41 dB 0.61 dB 0.80 dB 0.99 dB 1.18 dB 1.57 dB 1.95 dB up to 2.70 GHz (at 20C) up to 4.20 GHz 0.28 dB 0.53 dB 0.78 dB 1.03 dB 1.28 dB 1.53 dB 2.03 dB 2.53 dB 0.31 dB 0.59 dB 0.86 dB 1.14 dB 1.42 dB 1.70 dB 2.25 dB 2.81 dB up to 5.00 GHz 0.34 dB 0.65 dB 0.96 dB 1.27 dB 1.58 dB 1.89 dB 2.50 dB 3.12 dB up to 5.95 GHz RF power 25C (sea level) 150W 2GHz HUBER+SUHNER Excellence in Connectivity Solutions DOC-0000864437 100% tested HUBER+SUHNER RF CABLE ASSEMBLIES DATASHEET MULTI-PORT Jumper 2 / 2 LIS-C5X-11MQ5X-5x11NXX-XXXXX-53 Cable: 5x SUCOFEED 1/4 HFX (High Flex, X = cross linked) Connectors: 1x straight male MQ4X(screw/HEX.nut) + 5x straight male NEX10(X=screw/HEX.nut) Mechanical Data Cable length REF. to REF. of connector interfaces up to 2m: +/-10mm // up to 3m: +/-30mm MQ4X or MQ5X male connector (recommended) 25 Nm Coupling nut torque NEX10(X) (recommended) 1.5 2.5 Nm (max. 3 Nm) Single // Repeated (20 times) min. 25 mm // min. 50 mm Bending radius Cable bending must start after the molded connector cable entry protection Environmental Data Temperature range Operating // Installation // Storage - 4 0 C t o + 1 0 5 C / / -2 5 C to +60 C // -70 C to +85 C Waterproof rate IP68 (0.1 bar, 1 h, 20C) RoHS (2011/65/EU) / Lead free solder : compliant Requirement of included components MQ5X straight male connector (HEX. nut) Interface MQ5X / Meet std. IEC 63138-3 Coupling nut: HEX. 32 mm Body: Brass / NiSn Centre contact: CuBe / Silver Material / Plating Nut: Brass / Ni or NiSn Insulator PTFE NEX10(X) straight male connector (HEX. nut) Interface NEX10(X) / Meet std. IEC 61169-71 Coupling nut: HEX. 11 mm Body: Brass / Silver or Trimetal Centre contact: Brass / Silver Material / Plating Nut: Brass / Ni or Trimetal Insulator PTFE Corrugated 1/4 HFX (High Flexible, cross linked) cable PEX, black Jacket Max. 8.0 mm UV resistance: compliant (Polyethylene cross-linked) Marking and Packing Main label (No. 4): 10 cm from moulding MQ5X Positioning Label Cable label (No.5): 5 cm from moulding of connector No. 3 Printing Main Label: Manufacturers trade name/mark // PO or Batch no. // Product item No. Labels on cables: according mechanical diagram (page 1) Packing 1 Assembly in a plastic bag, with protection on connector interfaces Ordering Information / Product Description LIS-C5X-11MQ5X-5x11NXX-XXXXX-53 / XXXXX = Length of assembly in millimeters Example: LIS-C5X-11MQ5X-5x11NXX-02000-53 Jumper cable made with connectors 1x straight male MQ5X and 4x straight male NEX10(X) using corrugated cross linked cable 1/4 high flex with length 2000 millimeters (6.5 ft.). WAIVER It is exclusively in written agreements that we provide our customer with warrants and representations as to the technical contained specifications and/or the fitness for any particular purpose. The facts and figures herein are carefully complied to the best of our knowledge, but they are intended for general informational purposes only. HUBER+SUHNER is certified according to ISO 9001 and ISO 14001 RF Division Issued: 15/04/2021 Revision: B www.hubersuhner.com uncontrolled copy HUBER+SUHNER Excellence in Connectivity Solutions DOC-0000864437