Product Information

SM104.SA

SM104.SA electronic component of Ideal-Tek

Datasheet
Tweezers; 120mm; Blades: straight; SMD

Manufacturer: Ideal-Tek
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 23.4234 ea
Line Total: USD 23.4234

9 - Global Stock
Ships to you between
Thu. 04 Apr to Wed. 10 Apr
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
4 - Global Stock


Ships to you between Thu. 04 Apr to Wed. 10 Apr

MOQ : 1
Multiples : 1

Stock Image

SM104.SA
Ideal-Tek

1 : USD 24.57
2 : USD 23.2323

     
Manufacturer
Product Category
Blade Shape
Tools Application
Tweezers Features
Resistance To
Type Of Tool
Tool Material
Tweezers Length
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
4313 SM electronic component of Ideal-Tek 4313 SM

Knife; carton, leather
Stock : 0

2AMZ.SA electronic component of Ideal-Tek 2AMZ.SA

TWEEZER, CERAMIC, REPLACEABLE TIPS
Stock : 0

249 CF SA electronic component of Ideal-Tek 249 CF SA

TWEEZER, CARBOFIB TIP
Stock : 0

00.SA.DR.1 electronic component of Ideal-Tek 00.SA.DR.1

ESD TWEEZER, STRAIGHT/FLAT, 120MM
Stock : 1

128.SA electronic component of Ideal-Tek 128.SA

TWEEZER, BENT/FLAT, 105MM
Stock : 0

15AFW.C electronic component of Ideal-Tek 15AFW.C

TWEEZER, BENT/FLAT, 115MM
Stock : 0

242CPR.SA.1 electronic component of Ideal-Tek 242CPR.SA.1

Tweezers; replaceable tips; Blade tip shape: flat; ESD
Stock : 1

2A.TA.0 electronic component of Ideal-Tek 2A.TA.0

Tweezers; 120mm; for precision works; Blade tip shape: flat
Stock : 11

3.SA.NE.6 electronic component of Ideal-Tek 3.SA.NE.6

Tweezers; Blade tip shape: sharp; Tweezers len:120mm; ESD
Stock : 1

3C.SA.NE.6 electronic component of Ideal-Tek 3C.SA.NE.6

Tweezers; Blade tip shape: sharp; Tweezers len:110mm; ESD
Stock : 1

Image Description
0061300100100 electronic component of Alpen-Maykestag 0061300100100

Drill bit; metal; L:34mm; Ø:1mm; HSS Cobalt; Conform to: DIN 338
Stock : 29

4-22430-8 electronic component of TE Connectivity 4-22430-8

Other Tools CR-RECPAN HD AUTOMACHINE SYSTEM
Stock : 1

SM 32 M 2100 105 electronic component of Kemmer Prazision SM 32 M 2100 105

Drill bit; PCB; Ø: 2.1mm; L: 38.2mm; 1/8" (3,175mm)
Stock : 41

627625000 electronic component of Metabo 627625000

Drill bit; concrete; L:85mm; Ø:4mm; metal; cemented carbide
Stock : 1

0062600794100 electronic component of Alpen-Maykestag 0062600794100

Drill bit; for metal; Ø:5/16,7,94mm; L:117mm; HSS
Stock : 1

0062600980100 electronic component of Alpen-Maykestag 0062600980100

Drill bit; for metal; Ø:9.8mm; L:133mm; HSS; bulk, industrial
Stock : 20

0095400310100 electronic component of Alpen-Maykestag 0095400310100

Drill bit; for metal; Ø:3.1mm; L:65mm; HSS; Working part len:36mm
Stock : 30

YT-82435 electronic component of YATO YT-82435

Hot melt glue; Ø:11.2mm; blue; L:200mm; Bonding:20÷30s; 5pcs.
Stock : 31

YT-82436 electronic component of YATO YT-82436

Hot melt glue; Ø:11.2mm; green; L:200mm; Bonding:20÷30s; 5pcs.
Stock : 1

627991000 electronic component of Metabo 627991000

Drill bit; for wood; Ø: 8mm; L: 117mm; Working part len: 75mm
Stock : 10

Technical Datasheet: Stainless steel type SA General Notes low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L) contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements non-magnetizable good corrosion resistance to most chemicals, salts and acids generally used where corrosion resistance and toughness are primary requirements typical applications include tweezers for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments Composition Component Wt.% Component Wt.% Component Wt.% C 0.03 Si 1.0 Mn 2.0 P 0.045 S 0.03 Cr 17.0-19.0 Mo 2.5-3.0 Ni 12.5-15.0 Mechanical properties: State annealed 3 Density 8.0 g/cm Hardness HB30 215 Hardness Rockwell B 79 Tensile strength, ultimate: 500-700 MPa Tensile strength, yield 290 0.2% Yield stress 200 MPa Elongation, break 40% Modulus of elasticity 200 GPa Thermal properties Coef. of lin. therm expansion: 16.0 E-6/C 20C-100C Coef. of lin. therm expansion: 17.0 E-6/C 20C-300C Specific heat capacity: 0.50 J/(gK) Thermal conductivity: 15 W/(mK) Continuos use temperature: 350C Max service temperature, air 925C Electrical properties Resistivity 0.75 E-4 Ohm.cm This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material. Ideal-Tek SA declines all responsibility from an improper use of the product described in this document. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Hand Tools category: Click to view products by Ideal-Tek manufacturer: Other Similar products are found below : 568681-1 576786-2 58061-1 58176-1 58177-1 58177-2 58284-1 59085 0031 59737-5 015-0339-000 015-8755-001 600-146-06 M15570- 25 62200-5709 6-304052-1 63443-1002 63443-3513 63443-4025 63443-7114 6-354778-5 6-354779-2 63600-2995 63810-0105 M8196914-08 M819698-07 662508-1 662908-1 679994-1 679994-2 68764-0001 69001-0105 69002-5525 690124-7 690191-1 690191-4 690696-1 691409-4 691667-1 692006-2 692655-7 692776-1 692776-4 693077-3 693077-4 693597-1 D20418-137 D20419-189 ESR- 17x17 ET-LY10

Tariff Desc

8203.20 crimpers but NOT including crimping tools put up in packs containing electrical connectors TC8532098

8205.40.00 TC0844020 SCREWDRIVERS

8203.30.00 TC9900293 NIPPERS diagonal spring loaded with insulated handles length NOT exceeding 125mm

8203.20.00 TC0844180 PLIERS being ANY of
a aviation slip pliers
b bent nose pliers
c combination pliers,length NOT less than 210mm
d cutting pliers
e end nipper pliers
f groove joint pliers
g linesman pliers, length NOT less than 210mm
h lock grip pliers
i long nose pliers
j long reach pliers
k round nose pliers
l slip joint pliers
m snap ring pliers
n straight nose pliers
o welding clamp pliers
p wire stripper plier

8204.11.00 TC9810512 SPANNERS drop forged

8204.12.00 TC0110440 SPANNERS AND WRENCHES adjustable non calibrated

8204.11.00 TC0107157 SPANNERS AND WRENCHES non adjustable being ANY:
a combination open end and ring
b open end
c ring

8205.70.00 TC0302773 CLAMPS

8205.70.00 TC0302754 VICES

8204.11.00 TC0405019 HAND TOOLS being EITHER of the following
a allen key sets
b hex keys

9017.30.00 50 Micrometers callipers and gauges Free

8204.20.00 TC0009108 SOCKETS AND/OR SOCKET ACCESSORIES being ANY of
a sockets
b reducers
c tommy bars with sliding T handles
d extensions
e ratchets with coupler
f reversible ratchets
g couplers
h universal joints
i L-handles
j speed braces
k converters
l swivel handles
m driving handles socket drivers
n ratchet adaptors

8203.10.00 TC0302774 FILES OR RASPS

8206.00.00 TC0831549 KITS TOOL comprising not LESS than ANY two of
a allen keys
b chisels
c crimpers
d files
e hammers
f multi grips
g pliers
h punches
i saws
j screwdrivers
k shears
l snips
m sockets
n spanners
o wrenches

8425.42.00 TC9404347 JACKS, hand, hydraulic, having a maximum capacity of 2500kg

8207.50.00 TC9600818 DRILL BITS MASONARY having BOTH the following
a slotted shank
b hammer proof carbide tip

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted