QYE21XXF24DC IMO

TECHNICAL DATASHEET Miniature Intermediate Power Relay QYE 10A Switching Capability n 1.5kV Dielectric Strength (between coil & contacts) n Plug-In, PCB or Flange Mountable n Different Sockets Available n RoHS Compliant n Conforms to the CE Low Voltage Directive n Outline Dimensions: 28.0 x 21.3 x 35.2mm n Options & Ordering Codes QYE 2 1 XX F 24DC Contact Arrangement Coil 2 Pole CO 2 Voltage Termination No Flange Plug-In 1 Flange Mounting F PCB 2 No Indication XX With LED XN Contact Data Characteristics Contact Arrangement 2P Initial Insulation Resistance 500M (at 500VDC) Contact Resistance 100m (at 1A 6VDC) Between coil & contacts 1500VAC 1min Contact Material AgSnO Dielectric Strength Between open contacts 1000VAC 1min 2 Between contact sets 1500VAC 1min Contact Rating 10A 250VAC / 30VDC Max. Switching Voltage 250VAC / 30VDC Operate Time (at nominal voltage) 25ms max. Max. Switching Current 10A Release Time (at nominal voltage) 25ms max. 2 Max. Switching Power 2500VA / 300W Functional 100m/s Shock Resistance 7 2 Mechanical Life 1x10 OPS Destructive 1000m/s 5 Electrical Life 1x10 OPS Vibration Resistance 10 to 55Hz 1.5mm DA Ambient Temperature -40C to +55C Humidity 98% RH, +40C 8 Pin PCB, Plug-In Termination Unit Weight Approx 37g Construction Dust Protected Coil DC Type 900mW Coil Power AC Type 1.2VA Coil Data at 23C Drop-Out Voltage Coil Resistance Drop-Out Voltage Coil Resistance Nominal Voltage Pick-Up Voltage Nominal Voltage Pick-Up Voltage VDC VAC VDC VDC VAC VAC 0.6 40 (110%) 1.8 12 (110%) 6 4.8 6 4.8 12 9.6 1.2 160 (110%) 12 9.6 3.6 46 (110%) 24 19.2 2.4 650 (110%) 24 19.2 7.2 180 (110%) 4.8 2600 (110%) 14.4 780 (110%) 48 38.4 48 38.4 11.0 11000 (110%) 30.0 3750 (110%) 110 88.0 110 80.0 220 160.0 60.0 12950 (110%) 230 176.0 72.0 18790 (110%) Ref: QYE Errors and omissions excepted. Subject to change without notice. www.imopc.comTECHNICAL DATASHEET Miniature Intermediate Power Relay QYE Plug-In Dimensions (mm) Wiring Diagram 21.3 35.2 6.4 No Indication With LED 0.5 8- 2.5 3.2 NOTE: For AC parts with diode, the positive and negative pole markings on wiring diagram are not applicable. PCB Dimensions (mm) Wiring Diagram PCB Layout 21.3 35.2 5 No Indication With LED 10 8- 1.8* 3.5 14.2 NOTE: For AC parts with diode, the positive * Please adjust the site of and negative pole markings on wiring this diameter according to diagram are not applicable. the actual application Flange Mounting 21.3 2- 3.5 35.2 2 6.4 0.5 8- 2.5 3.2 Ref: QYE Errors and omissions excepted. Subject to change without notice. www.imopc.com 28.0 5.75 38.0 28.0 28.0 44.0 5 1.5 0.5 5 38 7.15 13.15 4.6