Product Information

CY7C68321-100AXC

CY7C68321-100AXC electronic component of Infineon

Datasheet
USB PERIPHERAL BATTERY APP, 7C68321

Manufacturer: Infineon
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 15.2886 ea
Line Total: USD 15.2886

0 - Global Stock
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1
1 : USD 19.3161
10 : USD 16.2789
25 : USD 13.484
50 : USD 11.6259
100 : USD 10.7329
250 : USD 10.0135

     
Manufacturer
Product Category
Brand
Data Rate
Supply Voltage Min
Supply Voltage Max
Interface Case Style
No. Of Pins
Operating Temperature Min
Operating Temperature Max
Rohs Phthalates Compliant
Svhc
Ic Generic Number
Operating Temperature Range
Supply Voltage Range
Termination Type
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
AM29F080B-55EF electronic component of Infineon AM29F080B-55EF

NOR Flash Parallel 5V 8M-bit 1M x 8 55ns 40-Pin TSOP
Stock : 0

ATR2815S/CH electronic component of Infineon ATR2815S/CH

Module DC-DC 1-OUT 15V 2A 30W 10-Pin ATR
Stock : 1

24VSHIELDBTT6030TOBO1 electronic component of Infineon 24VSHIELDBTT6030TOBO1

Power Management IC Development Tools 24V Switch Shield
Stock : 7

65DN06 ELEM electronic component of Infineon 65DN06 ELEM

Infineon Technologies Rectifiers 600V 8.47KA
Stock : 1

6PS04512E43W39693 electronic component of Infineon 6PS04512E43W39693

IGBT Modules STACKS IPM
Stock : 0

6MS10017E41W36460 electronic component of Infineon 6MS10017E41W36460

IGBT Modules STACKS IPM
Stock : 0

2PS12017E44G35911 electronic component of Infineon 2PS12017E44G35911

IGBT Modules STACKS IPM
Stock : 0

24VBATTSWITCHDEMO1 electronic component of Infineon 24VBATTSWITCHDEMO1

Power Management IC Development Tools The 24 V ADR Switch Demonstrator shows a semiconductor based solution of a 24 V battery master switch for trucks as required by the ADR regulation
Stock : 0

AHV2815DF/HBB electronic component of Infineon AHV2815DF/HBB

Module DC-DC 28VIN 2-OUT 15V/-15V 1.5A/-1.5A 15W 10-Pin AHV
Stock : 1

ACICBOARDTOBO1 electronic component of Infineon ACICBOARDTOBO1

Interface Development Tools
Stock : 2

Image Description
F-596-C electronic component of Waldom F-596-C

4 X 1/2 PAN HEAD SCREW
Stock : 1

RVUVK105CH020BW-F electronic component of Taiyo Yuden RVUVK105CH020BW-F

CAP, HIGH FREQ, 0402, 50V, C0H
Stock : 1

MPZ2012-KIT electronic component of TDK MPZ2012-KIT

C216-005
Stock : 1

RVEVK105CH3R9JW-F electronic component of Taiyo Yuden RVEVK105CH3R9JW-F

CAP, HIGH FREQ, 0402, 16V, C0H
Stock : 1

RMJMK063BJ224MP-F electronic component of Taiyo Yuden RMJMK063BJ224MP-F

CAP 0.22UF 6.3VDC X5R 20% SMD 0201
Stock : 1

RMUMK105CG3R9CV-F electronic component of Taiyo Yuden RMUMK105CG3R9CV-F

CAP, MLCC, 0402, 50V, C0G, 3.9
Stock : 1

OSTOQ025350 electronic component of On Shore Technology OSTOQ025350

Conn Shrouded Header (4 Sides) HDR 2 POS 5.08mm Solder ST Thru-Hole
Stock : 1

F-465-C electronic component of Waldom F-465-C

F465C waldom
Stock : 1

F-524-C electronic component of Waldom F-524-C

F524C waldom
Stock : 1

F-040-C electronic component of Waldom F-040-C

F040C waldom
Stock : 1

ATA EN (ATA Interface 3-state) CY7C68300B/CY7C68301B CY7C68320/CY7C68321 EZ-USB AT2LP USB 2.0 to ATA/ATAPI Bridge Support for CompactFlash and one ATA/ATAPI device 1.0 Features (CY7C68300B/CY7C68301B and CY7C68320/CY7C68321) Can place the ATA interface in high-impedance (Hi-Z) to allow sharing of the ATA bus with another controller (e.g., Fixed-function mass storage devicerequires no firmware an IEEE-1394 to ATA bridge chip or MP3 Decoder) code Support for board-level manufacturing test via USB Two power modes: Self-powered and USB bus-powered to interface enable bus powered CF readers and truly portable USB Low-power 3.3V operation hard drives Fully compatible with native USB mass storage class drivers Certified compliant for USB 2.0 (TID 40460273), the USB Mass Storage Class, and the USB Mass Storage Class Cypress mass storage class drivers available for Windows Bulk-Only Transport (BOT) Specification (98SE, ME, 2000, XP) and Mac OS X Operates at high (480-Mbps) or full (12-Mbps) speed USB 1.1 Features (CY7C68320/CY7C68321 only) Complies with ATA/ATAPI-6 specification Supports HID interface or custom GPIOs to enable features Supports 48-bit addressing for large hard drives such as single button backup, power-off, LED-based notifi- Supports ATA security features cation, etc. Supports all ATA commands via ATACB function Lead-free 56-pin QFN and 100-pin TQFP packages Supports mode page 5 for BIOS boot support CY7C68321 is ideal for battery-powered designs Supports ATAPI serial number VPD page retrieval for Digital CY7C68320 is ideal for self- and bus-powered designs Rights Management (DRM) compatibility Supports PIO modes 0, 3, 4, multiword DMA mode 2, and 1.2 Features (CY7C68300B/CY7C68301B only) UDMA modes 2, 3, 4 Pin-compatible with CY7C68300A (using Backward Uses one external serial EEPROM for storage of USB Compatibility mode) descriptors and device configuration data Lead-free 56-pin SSOP and 56-pin QFN packages ATA interface IRQ signal support CY7C68301B is ideal for battery-powered designs Support for one or two ATA/ATAPI devices CY7C68300B is ideal for self- and bus-powered designs 2.0 Block Diagram SCL I2C Bus Controller SDA Misc control signals 24 MHz PLL XTAL Internal Control Logic ATA Interface Control Signals Control ATA 16 Bit ATA Data Interface Logic VBUS CY Smart USB D+ USB 2.0 XCVR 4kByte FIFO Data FS/HS Engine D- Figure 2-1. Block Diagram Cypress Semiconductor Corporation 3901 North First Street San Jose, CA 95134 408-943-2600 Document 38-08033 Rev. *C Revised February 14, 2005 RESETCY7C68300B/CY7C68301B CY7C68320/CY7C68321 mass storage device ports. This bridge adheres to the Mass 3.0 Applications Storage Class Bulk-Only Transport Specification and is The CY7C68300B/301B and CY7C68320/321 implement a intended for bus- and self-powered devices. USB 2.0 bridge for all ATA/ATAPI-6 compliant mass storage The AT2LP is the latest addition to the Cypress USB mass devices, such as the following. storage portfolio, and is an ideal cost- and power-reduction Hard drives path for designs that previously used the ISD-300A1, ISD- CD-ROM, CD-R/W 300LP, or EZ-USB AT2. DVD-ROM, DVD-RAM, DVD+/R/W Specifically, the CY7C68300B/CY7C68301B includes a MP3 players mode that makes it pin-for-pin compatible with the EZ- Personal media players USB AT2 (CY7C68300A). CompactFlash The USB port of the CY7C68300B/301B and CY7C68320/321 Microdrives (AT2LP) are connected to a host computer directly or via the Tape drives downstream port of a USB hub. Host software issues Personal video recorders commands and data to the AT2LP and receives status and The CY7C68300B/301B and CY7C68320/321 support one or data from the AT2LP using standard USB protocol. two devices in the following configurations. The ATA/ATAPI port of the AT2LP is connected to one or two ATA/ATAPI master only mass storage devices. A 4-Kbyte buffer maximizes ATA/ATAPI ATA/ATAPI slave only data transfer rates by minimizing losses due to device seek ATA/ATAPI master and slave times. The ATA interface supports ATA PIO modes 0, 3, and 4, CompactFlash only multiword DMA mode 2 and Ultra DMA modes 2, 3, and 4. ATA/ATAPI slave and CompactFlash or other removable IDE master The device initialization process is configurable, enabling the AT2LP to initialize ATA/ATAPI devices without software inter- 3.1 Additional Resources vention. CY4615B EZ-USB AT2LP Reference Design Kit USB Specification version 2.0 5.0 68300A Compatibility ATA Specification T13/1410D Rev 3B The CY7C68300B/301B and CY7C68320/321 are available in USB Mass Storage Class Bulk Only Transport Specification, www.usb.org three package types that are pictured in the following sections. As mentioned above, the CY7C68300B/301B contains a 4.0 Introduction backward compatibility mode that allows the CY7C68300B/301B to be used in existing EZ-USB AT2 The EZ-USB AT2LP (CY7C68300B/CY7C68301B and (CY7C68300A) designs. Please refer to the logic flow below CY7C68320/CY7C68321) implements a fixed function bridge for more information on the pinout selection process. between one USB port and one or two ATA- or ATAPI-based Read EEPROM EEPROM No Signature 0x4D4D Yes Set Set EZ-USB AT2 EZ-USB AT2LP (CY7C68300A) (CY7C68300B) Pinout Pinout Normal Operation Figure 5-1. Simplified Startup Flowchart (68300B only) Document 38-08033 Rev. *C Page 2 of 36

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted