Product Information

SCREWCLAMP EASY2

SCREWCLAMP EASY2 electronic component of Infineon

Datasheet
Infineon Technologies Circuit Board Hardware - PCB

Manufacturer: Infineon
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 0.7909 ea
Line Total: USD 0.79

194 - Global Stock
Ships to you between
Thu. 16 May to Mon. 20 May
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
194 - WHS 1


Ships to you between Thu. 16 May to Mon. 20 May

MOQ : 1
Multiples : 1
1 : USD 1.03
10 : USD 0.8669
100 : USD 0.6919
600 : USD 0.6315
1000 : USD 0.5337
2600 : USD 0.5337
5000 : USD 0.5337
10000 : USD 0.5337

     
Manufacturer
Product Category
Packaging
Brand
Factory Pack Quantity :
Cnhts
Hts Code
Product Type
Subcategory
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
AM29F080B-55EF electronic component of Infineon AM29F080B-55EF

NOR Flash Parallel 5V 8M-bit 1M x 8 55ns 40-Pin TSOP
Stock : 0

ATR2815S/CH electronic component of Infineon ATR2815S/CH

Module DC-DC 1-OUT 15V 2A 30W 10-Pin ATR
Stock : 1

24VSHIELDBTT6030TOBO1 electronic component of Infineon 24VSHIELDBTT6030TOBO1

Power Management IC Development Tools 24V Switch Shield
Stock : 7

65DN06 ELEM electronic component of Infineon 65DN06 ELEM

Infineon Technologies Rectifiers 600V 8.47KA
Stock : 1

6PS04512E43W39693 electronic component of Infineon 6PS04512E43W39693

IGBT Modules STACKS IPM
Stock : 0

6MS10017E41W36460 electronic component of Infineon 6MS10017E41W36460

IGBT Modules STACKS IPM
Stock : 0

2PS12017E44G35911 electronic component of Infineon 2PS12017E44G35911

IGBT Modules STACKS IPM
Stock : 0

24VBATTSWITCHDEMO1 electronic component of Infineon 24VBATTSWITCHDEMO1

Power Management IC Development Tools The 24 V ADR Switch Demonstrator shows a semiconductor based solution of a 24 V battery master switch for trucks as required by the ADR regulation
Stock : 2

AHV2815DF/HBB electronic component of Infineon AHV2815DF/HBB

Module DC-DC 28VIN 2-OUT 15V/-15V 1.5A/-1.5A 15W 10-Pin AHV
Stock : 1

ACICBOARDTOBO1 electronic component of Infineon ACICBOARDTOBO1

Interface Development Tools
Stock : 2

Image Description
8630 electronic component of Keystone 8630

Keystone Electronics Circuit Board Hardware - PCB BOARD GUIDE
Stock : 1

1447-1 electronic component of Keystone 1447-1

Keystone Electronics Circuit Board Hardware - PCB .080 SWAGE PIN .335"
Stock : 1

200-BLK electronic component of Abbatron 200-BLK

Conn Insulated Phone Tip Plug Assembly PL 1 POS ST Cable Mount 1 Port
Stock : 1

Hot 3231-2-00-34-00-00-08-0 electronic component of Mill-Max 3231-2-00-34-00-00-08-0

Circuit Board Hardware - PCB 50u AU OVER NI
Stock : 7

561-LMTP250 electronic component of Eagle Plastic 561-LMTP250

Circuit Board Hardware - PCB THREADED PC SPT 1/4"
Stock : 1

05.508.3121.0 electronic component of Wieland 05.508.3121.0

Conn Test Jack SKT 1 POS ST 1 Port
Stock : 1

561-MMP006 electronic component of Eagle Plastic 561-MMP006

Circuit Board Hardware - PCB 6mm MINI POST
Stock : 1

8649 electronic component of Keystone 8649

Keystone Electronics Circuit Board Hardware - PCB VERTICAL GUIDE
Stock : 91

Z5.553.3021.0 electronic component of Wieland Z5.553.3021.0

Conn Test Jack SKT 1 POS ST 1 Port
Stock : 1

Z5.553.2921.1 electronic component of Wieland Z5.553.2921.1

TEST PLUG ST 2 / 2,3 BLACK
Stock : 1

APPLICATION NOTE Date:2003-02-14 Page 1 of 10 AN-Number: AN2003-01 (replaces AN2002-06) Mounting instructions for EasyPIM / EasyPACK modules with screw clamps 1. General information The mounting instructions outlined below are recommended for the safe and reliable operation of these modules in industry standard applications. These recommendations are based on our experiences gained during laboratory and field tests. Described is the mounting of EasyPIM- and EasyPACK modules (case style Easy1 and Easy2). These modules are intended to be mounted on a circuit board (PCB) 1,6 0,2 mm thick. To attach the module to the heat sink reliable and simple appropriate screw clamps are available for each type of module. Each module is bolted with two screw clamps on the heat sink. These clamps can orded from eupec separately. side view clamp Clamp for eupec GmbH Clamp for EasyPIM2/EasyPACK2 Max-Planck-Strae 5 EasyPIM1/EasyPACK1 D-59581 Warstein Autor / author: Ingo Graf Tel. +49(0)2902 764-1141 Fax +49(0)2902 764-1150 Email: Ingo.Graf eupec.com www.eupec.com An Infineon Technologies Company Mounting instructions for EasyPIM / EasyPACK modules with screw clamps Date:2003-02-14 Page 2 of 10 AN-Number: AN2003-01 (replaces AN2002-06) 2. Fastening the screw clamp in the module First the two clamps are inserted into the clamp guides on each side until they lock in place. Care has to be taken that the clamps are put in perpendicular to the sides of the housing, in order to avoid binding of the clamp in the plastic. The clamps should not be deformed or bent during this process (avoid any excess force on the screw hole flange and hook area). Inserted properly, the clamps are locked in place and can not fall out during further assembly steps. Note: No foreign materials are allowed between module and clamp as well as in the clamp guides. 1. 2. 3. 3. Soldering the module into the PCB The EasyPIM / EasyPACK module is locked into the circuit board (PCB) first. Locking takes place via the locking hooks present on the module into the appropriate holes of the PCB (for hole pattern and layout: see data sheet).

Tariff Desc

8547.90.00 9904140 SPACERS, INSULATED, having a maximum outside diameter of 8 mm

3926.90.90 Other articles of plastics and articles of other materials ---Other

7415 Nails, tacks, drawing pins, staples (other than those of 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper:
7415.3 -Other threaded articles:
7415.33.00 --Screws; bolts and nuts
7415.39.00 --Other

8536.69.90 SOCKETS, being ANY of the following:
(a) single pin, NOT exceeding 3.5 mm;
(b) micro, single pin, 2 mm;
(c) DC power connector, 2.1 mm OR 2.5 mm;
(d) 9 pin OR 15 pin, sub D;
(e) 2, 4 OR 8 pole microphone connector;
(f) 2, 3, 5, 6, 7, 8 OR 13 pin DIN;
(g) 16, 20, 26, 34, 40 OR 50 way dual in line crimp-on
Op. 04.02.1999 Dec. 23.04.1999 - TC 9900883"
CYP
Cypress
Cypress / Spansion
CYPRESS SEMI
Cypress Semicon
Cypress Semiconductor
Cypress Semiconductor Corp
INF
INFINEON
Infineon IR
INFINEON (CYPRESS)
Infineon (IRF)
Infineon / Cypress
Infineon / IR
INFINEON TECH ICs
Infineon Technologies
INFINEON TECHNOLOGIES AG
Infineon Technologies Americas Corp.
Infinite Power Solutions
INTERNATIONAL RECTIF
INTERNATIONAL RECTIFIER
International Rectifier HiRel Products
INTL RECTIFIER
IR
IRH
Ramtron
Ramtron / Cypress Semiconductor
Ramtron International Corp
SP9
SPANSION

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted