TLD1114-1EP LITIX Basic+ Features Single channel device with integrated and protected output stage (current source), optimized to drive LEDs as additional low cost current source Easy direct control without external component from other LITIX Basic+ LED Drivers High output current (up to 360 mA) Possibility to off-load power consumption to allow maximum current driving capability via low cost external components (Power Shift) Very low current consumption in sleep mode Very low output leakage when channel is off Low current consumption during fault Output currents control via external low power resistor Easy delivery of additional current/power demand via other LITIX Basic+ family members with direct drive Reverse polarity protection allows reduction of external components and improves system performance at low battery/input voltages Overload protection Wide temperature range: -40C < T < 150C J Output current control via external low power resistor Green product (RoHS compliant) Potential applications Cost effective stop/ tail function implementation with shared and separated LEDs per function Turn indicators Position, fog, rear lights and side markers Animated light functions like wiping indicators and welcome/goodbye functions Day Running Light Interior lighting functions like ambient lighting (including RGB color control), illumination and dash board lighting LED indicators for industrial applications and instrumentation Product validation Qualified for Automotive Applications. Product Validation according to AEC-Q100/101. Datasheet Rev. 1.00 www.infineon.com 1 2018-10-09 TLD1114-1EP LITIX Basic+ Description The LITIX Basic+ TLD1114-1EP is a single channel high-side driver IC with integrated output stage. It is designed to control LEDs with a current up to 360 mA. In typical automotive applications the device is capable of driving 3 red LEDs with a current up to 180 mA and even above, if not limited by the overall system thermal properties. Practically, the output current is controlled by an external resistor or reference source, independently from load and supply voltage changes. Table1 Product summary Parameter Symbol Values Operating voltage V 5.5 V 40 V S(nom) Maximum voltage V 40 V S(max) V OUT(max) Nominal output (load) current I 180 mA (nominal) when using the automotive OUT(nom) supply voltage range 8 V - 18 V. Currents up to I are possible with low thermal resistance OUT(max) R thJA Maximum output (load) current I 360 mA depending on R OUT(max) thJA Current accuracy at R = 10 k K 9003.33% SET RT Current consumption in sleep mode I 0.1 A S(sleep, typ) Maximum current consumption during I 850 A or less when fault is detected from another S(fault, ERRN) fault device (disabled via ERRN) Type Package Marking TLD1114-1EP PG-TSDSO-14 TLD1114 Datasheet 2 Rev. 1.00 2018-10-09