LITIX Basic TLD2310EL 3 Channel High-Side Current Source Package PG-SSOP-14 Marking TLD2310 1 Overview Applications Exterior LED lighting applications such as tail/brake light, turn indicator, position light, side marker,... Interior LED lighting applications such as ambient lighting (e.g. RGB), interior illumination and dash board lighting. VBATT GND ISO-Pulse EN protection circuit Internal depending on supply OUT3 requirements Thermal Output protection control OUT2 IN SET3 IN SET2 Current OUT1 adjustment IN SET1 TLD2310EL ** For EMI improvement if required Application Diagram with TLD2310EL Data Sheet Rev. 1.2 www.infineon.com 2018-04-26 C =2.2F mod R SET3 10k R SET2 R SET1 C =4.7nF VS VS GND 4.7nF** 4.7nF** 4.7nF** LITIX Basic TLD2310EL Overview Basic Features 3 Channel device with integrated output stages (current sources), optimized to drive LEDs with output current up to 120 mA per channel Low current consumption in sleep mode PWM-operation supported via VS- and EN-pin Output current adjustable via external low power resistor and possibility to connect PTC resistor for LED protection during over temperature conditions Reverse polarity protection and overload protection Undervoltage detection Wide temperature range: -40C < T < 150C j PG-SSOP-14 package with exposed heatslug Description The LITIX Basic TLD2310EL is a three channel high side driver IC with integrated output stages. It is designed to control LEDs with a current up to 120 mA. In typical automotive applications the device is capable to drive i.e. 3 red LEDs per chain (total 9 LEDs) with a current up to 60 mA, which is limited by thermal cooling aspects. The output current is controlled practically independent of load and supply voltage changes. Table1 Product Summary Parameter Symbol Value Operating voltage range V 5.5 V ... 40 V S(nom) Maximum voltage V 40 V S(max) V OUTx(max) Nominal output (load) current I 60 mA when using a supply voltage range of 8 V - 18 V (e.g. OUTx(nom) Automotive car battery). Currents up to I possible in OUT(max) applications with low thermal resistance R thJA Maximum output (load) current I 120 mA depending on thermal resistance R OUTx(max) thJA 750 7% Output current accuracy at R = 12 k k SETx LT Current consumption in sleep mode I 0.1 A S(sleep,typ) Protective Functions ESD protection Under voltage lock out Over Load protection Over Temperature protection Reverse Polarity protection Data Sheet 2 Rev. 1.2 2018-04-26