5014

5014 RF Wireless RGB Controller from Inspired LED The RF Wireless RGB Controller from Inspired LED is a sleek, convenient solution to controlling RGB LED Lighting. Choose from 15 different pre-programmed color changing modes, or simply select a solid color from the color wheel, by using the remote from up to 65 feet away from the controller. Turn the entire system on and off with the remote - when the system is turned back on, the previous setting will be resumed. Key Function How to Use the RGB Controller 1 On/Off Plug 12V Inspired LED Power Supply into the power connector. Connect Power 2 C hange Pre-Programmed Setting Plug all RGB flex into the four-pin RGB output. Connect LEDs 3 White Light / Color Light On/Off Press Key 1 to turn the RGB LEDs on or off in any state. 4 Increase Brightness/Speed Press Key 3 once to activate white light mode. Press Key 3 again to activate 5 Decrease Brightness/Speed Solid Color color light mode, and select a desired color by using the touch wheel. Change Pre-Programmed Color Changing Mode Chart for Key 2 brightness in either mode by pressing Key 4 or Key 5 . Mode Key 4/5 Function Description Pre-Programmed Press Key 2 to activate light changing mode, cycle through 15 pre-programmed 1 8 grades of Brightness Auto Color Changing modes by pressing Key 2 again. Color Changing 2 Three Color Jump Press Key 4 once within three seconds of connecting power to the controller to 3 Seven Color Jump 8 grades of Speed match the remote to the controller. The connected lights will blink 3 times if Remote Match 4 Three Color Gradual successfully matched. One remote may be matched to multiple controllers. 5 Seven Color Gradual 6 Blink Red 7 Press Key 4 five times within three seconds of connecting power to the controller Blink Blue Remote Clear 8 to clear a remote from a controller. The connected lights will blink 6 times if Blink Purple 9 8 grades of Brightness Blink Green successfully cleared and the remote will no longer influence the controller. 10 Blink Yellow Please dont touch or press the touch wheel within 3 seconds of loading the 11 Blink Cyan batteries to protect the sensitivity of the remote. If the touch wheel loses Remote Sensitivity 12 Blink White sensitivity, remove and reinstall the batteries. 13 Blink Red/Blue Alternately 14 8 grades of Speed Blink Green/Blue Alternately 15 Blink Red/Green Alternately 12 VDC Power Supply Look for + or Arrow on connector products Connect to +12VDC +12VDC G R B Cut Flex to length and solder on interface connector Controller Cable 5009 Four Conductor Cable RGB Flex Strip 5005 through 5008 RGB Remote Inspired LED 1733 E. McKellips Rd. Suite 111 Tempe, AZ 85281 (480) 941-4286 www.inspiredled.com X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for LED Lighting Fixture Accessories category: Click to view products by Inspired LED manufacturer: Other Similar products are found below : XVBC081 1-2315539-1 2306129-1 180997-0001 1-2213996-1 4821 2702312 4775 5012 5014 1301130007 1301120097 1301120099 1301120101 1301120114 1301120153 1301120154 1301120157 1301120174 1301120110 1301120137 1301120130 1301860719 1301120131 1301120144 1301120196 1301850471 2702313 2702315 2702316 2702493 PLD E 400-ME SM XVBC030 XVBC14 XVBC21 2213730-1 VFTBCSN1002FT VFTBCSP0102FT VFTJCSN0402FT VFTPCSN1010FT VFTPCSP0110FT XVBC00 XVBC020 1-2311664-1 2702492 2213871-2 2306132-1 2213805-1 1-2306133-1 2702527