Oscillator Specification Part No. + Packaging: LFPTXO000001BULK Description Sub 1ppm performance TCXO manufactured for us by Rakon utilising their Pluto ASIC technology, a single chip oscillator and analogue compensation circuit operating over an extended temperature range. Its ability to function down to a supply voltage of 2.4V and low power consumption make it particularly suitable for mobile applications. Model CFPT-9006-1A Model Issue number 13 Frequency Parameters Frequency 10.0MHz Frequency Tolerance 25C INCLUSIVE 1.00ppm Frequency Stability Operating Temperature Range -40.00 to 85.00C Ageing: 1ppm max in 1st year, frequency 20MHz 3ppm max for 10 years (including the 1st year), frequency 20MHz 2ppm max in 1st year, frequency >20MHz 5ppm max for 10 years (including the 1st year), frequency >20MHz Supply Voltage Variation (10% change): 0.2ppm typ Outline (mm) Load Variation (5pF change): 0.2ppm typ After Reflow (measured at least 60mins after reflow): 1ppm max Electrical Parameters Supply Voltage 3.3V Supply Voltage Tolerance 10% Supply Current: 1+Frequency(MHz)*Supply(V)* Load(pF)+15 *103 mA e.g. 20MHz, 3.3V, 15pF 2mA Optional reference voltage output on pad 1, suitable for potentiometer supply or DAC reference: 1. No output (standard option) 2. 2.2V for min Vs>2.4V 3. 2.7V for min Vs>3.0V Maximum load current (mA) = Vref/10 For manual frequency adjustment connect an external 50k potentiometer between pad 1 (Reference Voltage) and pad 4 (GND) with wiper connected to pad 10 (Voltage Control). Please specify reference voltage as part of the ordering code. Frequency Adjustment Input Impedance: 100k min Modulation Bandwidth: 2kHz min Standard Voltage Control Ranges: Without Reference Voltage Vs=3.3V 1.65V1.0V With Reference Voltage Vs=0V to Vref Linearity: 1% max B. No frequency adjustment initial calibration 25C 1.0ppm C. High Pulling 10ppm to 50ppm can be available depending on frequency and stability options (please contact an IQD Sales Office) Slope: Positive Output Details Output Compatability HCMOS Output Load 15pF Rise and Fall time (10% - 90%) 8ns max Duty Cycle 45/55% max Sales Office Contact Details: Email: info iqdfrequencyproducts.com UK: +44 (0)1460 270200 France: +33 (0)5 34 50 91 18 Germany: +49 (0)7264 9145-62 USA: +1 408.273.4530 Web: www.iqdfrequencyproducts.com Printed on 15 May 14 17:20 Page 1 of 2Oscillator Specification Part No. + Packaging: LFPTXO000001BULK Output Levels VoL: <10% Vs VoH: >90% Vs Output Control Tri-state Operation: Logic 1 (>60% Vs) or no connection to pad 8 enables output Logic 0 (<20% Vs) to pad 8 disables output When at logic 0 the output stage is disabled for all output options, but the oscillator and compensation circuit are still active (current consumption <1mA) Noise Parameters Phase Noise (typical for 13.0MHz 25C): -65dBc/Hz 1Hz -95dBc/Hz 10Hz -120dBc/Hz 100Hz -135dBc/Hz 1kHz -140dBc/Hz 10kHz -145dBc/Hz 100kHz Environmental Parameters Shock: IEC 60068-2-27, Test Ea: 1500G acceleration for 0.5ms, half sine pulse, 3 shocks in each of 3 mutually perpendicular planes Vibration: IEC 60068-2-6, Test Fc: 10Hz-60Hz, 1.5mm displacement, 60-2000Hz at 10G, 30mins in 3 mutually perpendicular planes at 1oct/min Storage Temperature Range: 55 to 125C Solderability: MIL-STD-202, Method 208, Category 3 Manufacturing Details Pb-free Reflow Soldering: 260C max for 30sec max Compliance RoHS Status Compliant REACh Status Compliant Packaging Pack Type: Bulk Loose in bulk pack Pack Size 10 Alternative packing option available This document is correct at the time of printing please contact your local office for the latest version. Sales Office Contact Details: Email: info iqdfrequencyproducts.com UK: +44 (0)1460 270200 France: +33 (0)5 34 50 91 18 Germany: +49 (0)7264 9145-62 USA: +1 408.273.4530 Web: www.iqdfrequencyproducts.com Printed on 15 May 14 17:20 Page 2 of 2