ULINKPRO-5V-ADPT Keil

ULINK Accessories ULINKpro 5Volt Adapter The 5Volt (5V) Adapter enables ULINKpro to connect to 5V-only target devices. ULINKpro 5V Adapter. Features Expands the I/O Voltage range to 1.5V - 5.5V to accommodate 5V-only devices Supports JTAG and SW clock speeds up to 50MHz Provides full speed data trace capture (SWV) Supports instruction trace capture up to 400 Mbps using 4-pin ETM Target Connectors 10-pin Cortex debug (0.05 inch connector) 20-pin Cortex debug + ETM Trace (0.05 inch connector) The 5V Adapter replaces ULINKpro s standard 20-pin ribbon cable, and connects to either the 10-pin (Cortex Debug) or 20-pin (Cortex Debug + ETM) connectors on Keil evaluation boards. Note The 5V Adapter is not included as standard with ULINKpro. It must be purchased separately. The 5V Adapter is only required when working with 5V only devices. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Keil manufacturer: Other Similar products are found below : RL-ARM MDK-ARM CA51 MCBSTM32F200U MCB1760 MCB11U10UME MCB1760U PB-HEAVY-D15/30-BL PB-HEAVY-D15/30- YL PB-HEAVY-D15/50-YL PB-HOME-1/15 MDK-ARM-B PB-HEAVY-D15/40-BK PB-HEAVY-D15/40-BL PB-HEAVY-D15/40-YL PB-HEAVY-D15/50-BK PB-HEAVY-D25/30-BK PB-HEAVY-D25/40-BL PB-HEAVY-D25/50-BL MCBSTM32 MCB2929UME MCB2470 PB-HEAVY-D15/50-BL PB-HEAVY-D25/40-BK PB-HEAVY-D25/40-YL PB-HEAVY-D15/30-BK PB-HEAVY-D25/50-YL PB-HOME-1/20 PB-HEAVY-D25/25-BK PB-HOME-1/10 ULINKPRO D ULINKPLUS ULINKPRO MDK-PLUS-T-LC MDKPR-KD- 40000