Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 3,000 VDC (Commercial Grade) Overview KEMETs High Voltage surface mount MLCCs in In addition to Commercial Grade, Automotive Grade devices C0G dielectric feature a 125C maximum operating are available which meet the demanding Automotive temperature and are considered stable. The Electronics Electronics Council s AEC-Q200 qualification requirements. Industries Alliance (EIA) characterizes C0G dielectric as a Class I material. Components of this classification are temperature compensating and are suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required. C0G exhibits no change in capacitance with respect to time and voltage and boasts a negligible change in capacitance with reference to ambient temperature. Capacitance change is limited to 30ppm/C from 55C to +125C. These devices exhibit low ESR at high frequencies and find conventional use as snubbers or filters in applications such as switching power supplies and lighting ballasts. Their exceptional performance at high frequencies has made high voltage MLCC s the preferred dielectric choice of design engineers worldwide. In addition to their use in power supplies, these capacitors are widely used in industries related to automotive(hybrid), telecommunications, medical, military, aerospace, semiconductors and test/diagnostic equipment. Ordering Information C 1210 C 332 J C G A C TU Case Size Specification/ Capacitance Capacitance Rated Voltage Failure Rate/ Packaging/ 2 Ceramic Dielectric Termination Finish 1 ( x ) Series Code (pF) Tolerance (VDC) Design Grade (C-Spec) 0603 C = Standard Two B = 0.10 pF C = 500 G = C0G A = N/A C = 100% Matte Sn See 0805 significant C = 0.25 pF B = 630 L = SnPbPackaging 1206 digits and D = 0.5 pF D = 1,000 (5% Pb minimum) C-Spec 1210 number of F = 1% F = 1,500 Ordering 1808 zeros. G = 2% G = 2,000 Options 1812 J = 5% Z = 2,500 Tabl below 1825 K = 10% H = 3,000 2220 M = 20% 2225 2824 3040 3640 4540 1 Additional capacitance tolerance offerings may be available. Contact KEMET for details. 2 Additional termination finish options may be available. Contact KEMET for details. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1009 C0G HV SMD 12/6/2016 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 3,000 VDC (Commercial Grade) Packaging C-Spec Ordering Options Table Packaging/Grade 1 Packaging Type Ordering Code (C-Spec) Bulk Bag/Unmarked Not required (Blank) 7 Reel/Unmarked TU 7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked 7210 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2 mm pitch 7081 2 13 Reel/Unmarked/2 mm pitch 7082 1 Default packaging is Bulk Bag. An ordering code C-Spec is not required for Bulk Bag packaging. 1 Bulk Ba packaging option is not available for case sizes larger than 2225 (5664 Metric). 1 The terms Marked and Unmarked pertain to laser marking option of capacitors. All packaging options labeled as Unmarked will contain capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information see Capacitor Marking. 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see Tape & Reel Packaging Information. Benefits Operating temperature range of 55C to +125C Preferred capacitance solution at line frequencies Lead (Pb)-Free, RoHS and REACH compliant and into the MHz range EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, No capacitance change with respect to applied 2225, 2824, 3040, 3640 and 4540 case sizes rated DC voltage DC voltage ratings of 500 V, 630 V, 1 KV, 1.5 KV, 2 KV, Negligible capacitance change with respect to 2.5 KV and 3 KV temperature from 55C to +125C Capacitance offerings ranging from 1pF to 0.150F No capacitance decay with time Available capacitance tolerances of 0.10pF, 0.25pF, Non-polar device, minimizing installation concerns 0.5pF, 1%, 2%, 5%, 10% and 20% Automotive (AECQ200) grade available No piezoelectric noise 100% pure matte tin-plated termination finish allowing Extremely low ESR and ESL for excellent solderability High thermal stability SnPb plated termination finish option available upon High ripple current capability request (5% Pb minimum) Applications Typical applications include switch mode power supplies (input filters, resonators, tank circuits, snubbed circuits, output filters), high voltage coupling and DC blocking, lighting ballasts, voltage multiplier circuits, DC/DC converters and coupling capacitors in uk converters. Markets include power supply, LCD fluorescent backlight ballasts, HID lighting, telecom equipment, industrial and medical equipment/control, LAN/WAN interface, analog and digital modems, and automotive. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1009 C0G HV SMD 12/6/2016 2