Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, 900 Series, Encapsulated, AH Type, X1 400 VAC/Y1 250 VAC (Industrial Grade) Overview KEMETs 900 series encapsulated radial leaded ceramic With a working voltage of 400 VAC in line-to-line (Class X)and disc capacitors are specifically designed for interference- 250 VAC in line-to-ground (Class Y) applications, these safety suppression AC line filtering applications. Having capacitors meet the impulse test criteria outlined in IEC internationally recognized safety certifications, these Standard 60384. Meeting subclass X1 and Y1 requirements, capacitors are well-suited for applications that require these devices are certified to withstand impulses up to 4 keeping potentially disruptive or damaging line transients KV (X1) and 8 KV (Y1) respectively. These encapsulated and EMI out of susceptible equipment. They are also an devices also meet the flame test requirements outlined in UL ideal solution when needing to suppress line disturbances Standard 94V0. at the source. Safety Certified Capacitors are classified as either X and/ or Y capacitors. Class X capacitors are primarily used in line-to line (across-the-line) applications. In this application there is no danger of electric shock to humans should the capacitor fail, but could result in a risk of fire. The class Y capacitor is primarily used in line-to-ground (line by-pass) applications. In this application, failure of the capacitor could lead to danger of electric shock. Ordering Information C9 1 1 U 620 J U S D A A 7317 Ceramic Body Lead Capacitance Capacitance Rated Dielectric/ Failure Packaging 2 Spec. Design Lead Config. 1 Series Diameter Spacing Code (pF) Tolerance Voltage Temp. Char. Rate (C-Spec) C9 = 0 = 7.0 mm 1 = U = Two J = 5% U = X1 S = SL D = A = Straight A = See Ceramic 1 = 8.0 mm 10.0 mm Safety significant K = 10% 400 VAC Y = Y5P Disc B = N/APackaging 900 2 = 9.0 mm digits and M = 10% /Y1 250 W = Y5U Vertical C-Spec Series 3 = 10.0 mm number of VAC V = Y5V Kink Ordering 4 = 11.0 mm zeroes C = Outside Options 5 = 12.0 mm Kink Tabl 7 = 14.0 mm below 1 Vertical Kin andOutside Kin lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is only available on capacitors ordered with straight leads (lead configuration ordering code). For nonstandard lead length inquiries, please contact KEMET. 2 Bulk packaging lead length availability is dependent uponLead Configuration SeeDimension section of this document to verify availability of a specific lead length option. For nonstandard lead length inquiries, please contact KEMET. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1067 X1 400 VAC Y1 250 VAC 1/13/2017 1Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, 900 Series, Encapsulated, AH Type, X1 400 VAC/Y1 250 VAC (Industrial Grade) Packaging C-Spec Ordering Options Table Lead Length Packaging Packaging Type 2,3 (mm) Ordering Code (C-Spec) 20.0+1.5/1.0 (straight leads) Ammo Pack 7317 1 18.0+2.0/0 (preformed leads ) 3.01.0 WL30 3.51.0 WL35 4.01.0 WL40 Bulk Bag 4.51.0 WL45 5.01.0 WL50 4 20.0 minimum WL20 1 Preformed (crimped) lead configurations include vertical kink, outside kink and inside kink. SeeLead Configuration andOrdering Informatio sections of this document for further details. 2 Vertical Kin,Outside Kin andInside Kin lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is only available on capacitors with straight leads (lead configuration ordering code). For nonstandard lead length inquiries, please contact KEMET. 3 For nonstandard lead length inquiries, please contact KEMET. 4 Lead length of 20.0 mm minimum only available for straight leads. Benefits Safety Standard Recognized (IEC 60384-14) Reliable operation up to 125C Class X1/Y1 10 mm lead spacing Lead (Pb)-free and RoHS Compliant Halogen free Capacitance offerings ranging from 10 pF up to 10 nF Available capacitance tolerances of 5%, 10% and 20% High reliability Preformed (crimped) or straight lead configurations Non-polar device, minimizing installation concerns 100% pure matte tin-plated lead finish allowing for excellent solderability Encapsulation meets flammability standard UL 94V0 Applications Typical applications include: Line-to-line (Class X) filtering Line-to-ground (Class Y) filtering Antenna coupling Primary and secondary coupling (switching power supplies) Line disturbances suppression (motors and motor controls, relays, switching power supplies, and inverters) KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1067 X1 400 VAC Y1 250 VAC 1/13/2017 2