EMI-RFI Filters GL Inlet Single-Phase Filters Overview Applications T h e K E M E T G L c o m pa c t i nl e t fi l te r s c ove r si n g l e - p has e Industrial equipment requirements with a wide variety of characteristics. These Electronic equipment fi l te r s a r e o p ti mize d fo r c o n d u c ti o n n ois e . Audiovisual system Benefits Single-phase 250 VAC Current range from 3 to 15 A O p e r a ti n g te m p e r a t u r e r a n g e fr o m 25 C to +5 5 C UL and CSA or UL, CSA, and TV, or TV approved versions available RoHS compliant Part Number System GL- 2 03 0C -10 Series Phase Rated Current (A) S p e c i fi ca ti on Terminal Type GL 2 = Single-phase 0x = 0x A 0C = Standard Blank = Solder terminal xx = xx A 0C1 = Without C capacitor -10 = Solder terminal Y 0C2 = High performance at low frequency -20 = Faston terminal 187 0C3 = High performance at high frequency -30 = Faston terminal 250 0C4 = with C capacitor 0.082 F X 0E = Downward terminal Note: With exceptions, 0ET = Downward terminal, without C capacitor see Table 1 for details Y 0F = Compact Note: Faston is a registered 0 F V = S q u e e z e c a s e trademark of Tyco Electronics 0H2 = With fuse AMP 0M = High performance at low frequency, limited to rear panel mounting Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard ERF0009 GL 12/2/2020 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comEMI-RFI Filters GL Inlet Single-Phase Filters Dimensions Millimeters GL-***0C* Installation Reference 1) For rear panel installation 2) For front panel installation Recommended torque (N-m) maximum Panel installation (M3: 0.78) KEMET Electronics Corporation KEMET Tower One East Broward Boulevard ERF0009 GL 12/2/2020 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com