AA2214VRBXS/A-SC-AMT 2.2 x 1.4 mm Surface Mount LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 2.2 mm x 1.4 mm, 1.3 mm high Low power consumption Available on tape and reel Package: 2000 pcs / reel Moisture sensitivity level: 3 RoHS compliant APPLICATIONS Traffic signaling Backlighting (illuminated advertising , general lighting) RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Interior and exterior automotive lighting Substitution of micro incandescent lamps Reading lamps Signal and symbol luminaire for orientation Marker lights (e.g. Steps, exit ways, etc) Decorative and entertainment lighting Indoor and outdoor commercial and residential architectural lighting Notes: ATTENTION 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. Observe precautions for handling 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. electrostatic discharge sensitive devices 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number (Material) Code. Min. Max. 2 1/2 S 500 700 T 700 1000 Blue (InGaN) AA2214VRBXS/A-SC-AMT 120 U 1000 1300 V 1300 1600 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 6 2017 Kingbright. All Rights Reserved. Spec No: DSAL5013 / 1201007474 Rev No: V.3B Date: 09/27/2017 AA2214VRBXS/A-SC-AMT ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Chromaticity Coordinates x 1 x Blue 0.19 - - I = 20mA F Chromaticity Coordinates y 1 y Blue 0.19 - - I = 20mA F Capacitance C Blue 100 - pF 2 Forward Voltage I = 20mA V Blue 3.3 4.0 V F F Reverse Current (V = 5V) I Blue - 50 uA R R Temperature Coefficient of x -3 TC Blue -0.16 - 10 /C x I = 20mA, -10C T 100C F Temperature Coefficient of y -3 TC Blue -0.18 - 10 /C y I = 20mA, -10C T 100C F Temperature Coefficient of V F TC Blue -3.0 - mV/C V I = 20mA, -10C T 100C F Notes: 1. Measurement tolerance of the chromaticity coordinates is 0.01. 2. Forward voltage: 0.1V. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 120 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +100 C op Storage Temperature T -40 to +110 C stg DC Forward Current I 30 mA F 1 Peak Forward Current I 100 mA FM Electrostatic Discharge Threshold (HBM) 250 V - 2 Thermal Resistance (Junction / Ambient) R 330 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 215 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 6 2017 Kingbright. All Rights Reserved. Spec No: DSAL5013 / 1201007474 Rev No: V.3B Date: 09/27/2017