AA3528VRBXS/A-SC-AMT 3.5 x 2.8 mm Surface Mount LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES Single color Suitable for all SMD assembly and solder process Available on tape and reel Ideal for backlighting Package: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant APPLICATIONS Traffic signaling RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Backlighting (illuminated advertising , general lighting) Interior and exterior automotive lighting Substitution of micro incandescent lamps Reading lamps Signal and symbol luminaire for orientation Marker lights (e.g. Steps, exit ways, etc) Decorative and entertainment lighting Indoor and outdoor commercial and residential architectural lighting Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to ATTENTION change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. Observe precautions for handling electrostatic discharge sensitive devices SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number (Material) Code. Min. Max. 2 1/2 T 700 1000 AA3528VRBXS/A-SC-AMT Blue (InGaN) U 1000 1300 120 V 1300 1600 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 6 2019 Kingbright. All Rights Reserved. Spec No: DSAL5014 / 1201007473 Rev No: V.6B Date: 11/28/2019 AA3528VRBXS/A-SC-AMT ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Chromaticity Coordinates x 1 x Blue 0.19 - - I = 20mA F Chromaticity Coordinates y 1 y Blue 0.19 - - I = 20mA F Capacitance C Blue 100 - pF 2 Forward Voltage I = 20mA V Blue 3.3 4.0 V F F Reverse Current (V = 5V) I Blue - 50 A R R Temperature Coefficient of x -3 TC Blue -0.15 - 10 /C x I = 20mA, -10C T 100C F Temperature Coefficient of y -3 TC Blue -0.18 - 10 /C y I = 20mA, -10C T 100C F Temperature Coefficient of V F TC Blue -3.0 - mV/C V I = 20mA, -10C T 100C F Notes: 1. Measurement tolerance of the chromaticity coordinates is 0.01. 2. Forward voltage: 0.1V. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 120 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +100 C op Storage Temperature T -40 to +110 C stg DC Forward Current I 30 mA F 1 Peak Forward Current I 100 mA FM Electrostatic Discharge Threshold (HBM) 250 V - 2 Thermal Resistance (Junction / Ambient) R 270 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 150 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 6 2019 Kingbright. All Rights Reserved. Spec No: DSAL5014 / 1201007473 Rev No: V.6B Date: 11/28/2019