AM2520SECK09 Kingbright

AM2520SECK09 Subminiature Solid State Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Super Bright Orange device is made with AlGaInP (on GaAs substrate) light emitting diode chip Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES Subminiature package Z-bend lead Long life - solid state reliability Low package profile Moisture sensitivity level: 3 Package: 1000 pcs / reel Halogen-free RoHS compliant RECOMMENDED SOLDERING PATTERN APPLICATIONS (units : mm tolerance : 0.1) Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 2700 4800 Super Bright Orange AM2520SECK09 Water Clear 20 (AlGaInP) *1900 *3500 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAD1285 / 1202000615 Rev No: V.15A Date: 01/04/2021 AM2520SECK09 ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission I = 20mA Super Bright Orange 610 - nm F peak 1 Dominant Wavelength I = 20mA Super Bright Orange 605 - nm F dom Spectral Bandwidth at 50% REL MAX Super Bright Orange 29 - nm I = 20mA F Capacitance C Super Bright Orange 15 - pF 2 Forward Voltage I = 20mA V Super Bright Orange 2.1 2.5 V F F Reverse Current (V = 5V) I Super Bright Orange - 10 A R R Temperature Coefficient of peak TC Super Bright Orange 0.13 - nm/C peak I = 20mA, -10C T 85C F Temperature Coefficient of dom TC Super Bright Orange 0.06 - nm/C dom I = 20mA, -10C T 85C F Temperature Coefficient of V F TC Super Bright Orange -1.9 - mV/C V I = 20mA, -10C T 85C F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 75 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 mA F 1 Peak Forward Current I 195 mA FM Electrostatic Discharge Threshold (HBM) 3000 V - 2 Thermal Resistance (Junction / Ambient) R 620 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 460 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAD1285 / 1202000615 Rev No: V.15A Date: 01/04/2021