APB3025SYKQWDF Kingbright

3.0x2.5mm SURFACE MOUNT LED LAMP Part Number: APB3025SYKQWDF ATTENTION Super Bright Yellow OBSERVE PRECAUTIONS White FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions z 3.0mmx2.5mm SMD LED, 1.1mm thickness. z The Super Bright Yellow device is made with AlGaInP z Bi -color,low power consumption. (on GaAs substrate) light emitting diode chip. z Wide viewing angle. z The source color devices are made with InGaN Light z Ideal for backlight and indicator. Emitting Diode. z Package : 2000pcs / reel. z Electrostatic discharge and power surge could damage z Moisture sensitivity level : level 3. the LEDs. z RoHS compliant. z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Package Dimensions Yellow White Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAL1002 REV NO: V.3B DATE: OCT/14/2015 PAGE: 1 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203011785 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 Super Bright Yellow (AlGaInP) 80 150 APB3025SYKQWDF Yellow Fluorescent 120 White (InGaN) 200 380 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C YELLOW Symbol Parameter Emitting Color Typ. Max. Units Test Conditions peak Peak Wavelength Super Bright Yellow 590 nm IF=20mA D 1 Dominant Wavelength Super Bright Yellow 590 nm IF=20mA 1/2 Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V f=1MHz VF 2 Forward Voltage Super Bright Yellow 2 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Electrical / Optical Characteristics at TA=25C WHITE Symbol Parameter Emitting Color Typ. Max. Units Test Conditions VF 1 Forward Voltage White 3.3 4.0 V IF=20mA IR Reverse Current White 50 uA VR = 5V X 2 0.31 Chromaticity Coordinates White Y 2 0.31 C Capacitance White 100 pF VF=0V f=1MHz Notes: 1. Forward Voltage: +/-0.1V. 2. Measurement tolerance of the chromaticity coordinates is 0.01. 3. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Super Bright Yellow White Units Power dissipation 75 120 mW DC Forward Current 30 30 mA Peak Forward Current 1 175 150 mA Electrostatic Discharge Threshold (HBM) 3000 250 V Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAL1002 REV NO: V.3B DATE: OCT/14/2015 PAGE: 2 OF 7 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203011785