APG0603SYC-TT Kingbright

APG0603SYC-TT 0.65 x 0.35 x 0.2 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Super Bright Yellow source color devices are Made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 0.65 mm x 0.35 mm SMD LED, 0.2 mm thickness Low power consumption Wide viewing angle Compatible with automatic placement equipment Package: 4000 pcs / reel Moisture sensitivity level: 2 Halogen-free RoHS compliant APPLICATIONS RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling Mask open area ratio:80% electrostatic discharge sensitive devices Mask thickness:80~100um Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 10mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 Super Bright Yellow APG0603SYC-TT Water Clear 10 30 140 (AlGaInP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAO2862 / 1203014743 Rev No: V.7B Date: 03/25/2021 APG0603SYC-TT ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission I = 10mA Super Bright Yellow 591 - nm F peak 1 Dominant Wavelength I = 10mA Super Bright Yellow 589 - nm F dom Spectral Bandwidth at 50% REL MAX Super Bright Yellow 15 - nm I = 10mA F 2 Forward Voltage I = 10mA V Super Bright Yellow 2.01 2.35 V F F Reverse Current (V = 5V) I Super Bright Yellow - 10 A R R Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 48 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 20 mA F 1 Peak Forward Current I 100 mA FM Electrostatic Discharge Threshold (HBM) 3000 V - Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAO2862 / 1203014743 Rev No: V.7B Date: 03/25/2021