APHB1608CGKSURKC Kingbright

APHB1608CGKSURKC 1.6 x 0.8 x 0.5 mm Bi-Color Surface Mount LED DESCRIPTIONS PACKAGE DIMENSIONS The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 1.6 x 0.8 mm SMD LED, 0.5 mm thickness Compatible with reflow soldering Available in various color combination Package: 2000 pcs / reel Moisture sensitivity level: 3 Tinned pads for improved solderability Halogen-free RoHS compliant APPLICATIONS RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 20 50 Green (AlGaInP) *20 *50 APHB1608CGKSURKC Water Clear 130 120 250 Hyper Red (AlGaInP) *40 *90 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAK6423 / 1203011105 Rev No: V.12A Date: 01/06/2021 APHB1608CGKSURKC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Green 574 Wavelength at Peak Emission I = 20mA - nm F peak Hyper Red 645 Green 570 1 Dominant Wavelength I = 20mA - nm F dom Hyper Red 630 Spectral Bandwidth at 50% REL MAX Green 20 - nm I = 20mA Hyper Red 28 F Green 15 Capacitance C - pF Hyper Red 35 Green 2.1 2.5 2 Forward Voltage I = 20mA V V F F Hyper Red 1.95 2.5 Green 10 Reverse Current (V = 5V) I - A R R Hyper Red 10 Temperature Coefficient of Green 0.12 peak TC - nm/C peak I = 20mA, -10C T 85C Hyper Red 0.14 F Temperature Coefficient of Green 0.08 dom TC - nm/C dom I = 20mA, -10C T 85C Hyper Red 0.05 F Temperature Coefficient of V Green -1.9 F TC - mV/C V I = 20mA, -10C T 85C Hyper Red -1.9 F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Green Hyper Red Power Dissipation P 75 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 30 mA F 1 Peak Forward Current I 150 185 mA FM Electrostatic Discharge Threshold (HBM) 3000 3000 V - 2 Thermal Resistance (Junction / Ambient) R 480 640 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 350 490 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAK6423 / 1203011105 Rev No: V.12A Date: 01/06/2021