APHB1608SYKSURKC Kingbright

APHB1608SYKSURKC 1.6 x 0.8 x 0.5 mm Bi-Color Surface Mount LED DESCRIPTIONS PACKAGE DIMENSIONS The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 1.6 x 0.8 mm SMD LED, 0.5 mm thickness Compatible with reflow soldering Available in various color combination Package: 2000 pcs / reel Moisture sensitivity level: 3 Tinned pads for improved solderability Halogen-free RoHS compliant APPLICATIONS RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 80 150 Super Bright Yellow (AlGaInP) *80 *150 APHB1608SYKSURKC Water Clear 130 120 250 Hyper Red (AlGaInP) *40 *90 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAK7903 / 1203011313 Rev No: V.10A Date: 04/07/2021 APHB1608SYKSURKC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Super Bright Yellow 590 Wavelength at Peak Emission I = 20mA - nm F peak Hyper Red 645 1 Super Bright Yellow 590 Dominant Wavelength I = 20mA - nm F dom Hyper Red 630 Spectral Bandwidth at 50% REL MAX Super Bright Yellow 20 - nm I = 20mA Hyper Red 28 F Super Bright Yellow 20 Capacitance C - pF Hyper Red 35 Super Bright Yellow 2 2.5 2 Forward Voltage I = 20mA V V F F Hyper Red 1.95 2.5 Super Bright Yellow 10 Reverse Current (V = 5V) I - A R R Hyper Red 10 Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Super Bright Yellow Hyper Red Power Dissipation P 75 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 30 mA F 1 Peak Forward Current I 175 185 mA FM Electrostatic Discharge Threshold (HBM) 3000 3000 V - Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAK7903 / 1203011313 Rev No: V.10A Date: 04/07/2021