APPA3010ZGCK

APPA3010ZGCK 3.0 mm x 1.0 mm Right Angle SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Green source color devices are made with InGaN on Sapphire Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 3.0 x 2.5 x 1.0 mm right angle SMD LED, 1.0 mm thickness Low power consumption Ideal for back light and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 Tinned pads for improved solderability RoHS compliant APPLICATIONS Backlight RECOMMENDED SOLDERING PATTERN Status indicator (units : mm tolerance : 0.1) Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 APPA3010ZGCK Green (InGaN) Water Clear 500 700 30 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2018 Kingbright. All Rights Reserved. Spec No: DSAN5348 / 1203014019 Rev No: V.4B Date: 06/13/2018 APPA3010ZGCK ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission I = 20mA Green 515 - nm F peak 1 Dominant Wavelength I = 20mA Green 525 - nm F dom Spectral Bandwidth at 50% REL MAX Green 35 - nm I = 20mA F Capacitance C Green 45 - pF 2 Forward Voltage I = 20mA V Green 3.3 4.1 V F F Reverse Current (V = 5V) I Green - 50 uA R R Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 102.5 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 25 mA F 1 Peak Forward Current I 150 mA FM Electrostatic Discharge Threshold (HBM) 450 V - Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2018 Kingbright. All Rights Reserved. Spec No: DSAN5348 / 1203014019 Rev No: V.4B Date: 06/13/2018