APT2012SECKJ3-PRV Kingbright

2.0x1.25mm SMD CHIP LED LAMP Part Number: APT2012SECK/J3-PRV Hyper Red Features Description z 2.0mm x1.25mm SMT LED,0.75mm thickness. The Hyper Red device is based on light emitting diode chip z Low power consumption. made from AlGaInP. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAN0480 REV NO: V.1A DATE: JUN/14/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203013844 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 700 1100 APT2012SECK/J3-PRV Hyper Red (AlGaInP) Water Clear 120 *200 *350 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Hyper Red 640 nm IF=20mA D 1 Dominant Wavelength Hyper Red 625 nm IF=20mA 1/2 Spectral Line Half-width Hyper Red 20 nm IF=20mA C Capacitance Hyper Red 27 pF VF=0V f=1MHz VF 2 Forward Voltage Hyper Red 2.2 2.8 V IF=20mA IR Reverse Current Hyper Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Units Power dissipation 84 mW DC Forward Current 30 mA Peak Forward Current 1 150 mA Reverse Voltage 5 V Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAN0480 REV NO: V.1A DATE: JUN/14/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203013844