L-53LGD-TNR2.54 Kingbright

T-1 3/4 (5mm) TAPE AND REEL LED LAMP Part Number: L-53LGD-TNR2.54 Green Features Description z For the use of automatic insertion machine. The Green source color devices are made with Gallium z 2.54mm straight lead. Phosphide Green Light Emitting Diode. z LED lamps also available in tape & box package. z Low current IF=2mA operating. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAC9391 REV NO: V.5B DATE: APR/20/2015 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1103000655 Selection Guide Iv (mcd) 2 Viewing 2mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 L-53LGD-TNR2.54 Green (GaP) Green Diffused 1.2 3 60 Notes: 1. 1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value. 2. Luminous intensity / luminous Flux: + / -15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Green 565 nm IF=2mA D 1 Dominant Wavelength Green 568 nm IF=2mA 1/2 Spectral Line Half-width Green 30 nm IF=2mA C Capacitance Green 15 pF VF=0V f=1MHz VF 2 Forward Voltage Green 1.9 2.5 V IF=2mA IR Reverse Current Green 10 uA VR = 5V Notes: 1. Wavelength: + / -1nm. 2. Forward Voltage: + / -0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 62.5 mW DC Forward Current 25 mA Peak Forward Current 1 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1 / 10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAC9391 REV NO: V.5B DATE: APR/20/2015 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.T.Liu ERP: 1103000655