L-710A8EW/1ID Kingbright

T-1 (3mm) RIGHT ANGLE LED INDICATOR L-710A8EW/1ID HIGH EFFICIENCY RED Features Description zI.C. COMPATIBLE. The High Efficiency Red source color devices are zBLACK CASE ENHANCES CONTRAST RATIO. made with Gallium Arsenide Phosphide on Gallium zWIDE VIEWING ANGLE. Phosphide Orange Light Emitting Diode. zHIGH RELIABILITY LIFE MEASURED IN YEARS. zUL RATING : 94V-0. zHOUSING MATERIAL: TYPE 66 NYLON. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAE7178 REV NO: V.3 DATE:MAR/19/2005 PAGE: 1 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:H.Q.YUANSelection Guide Iv (mcd) Viewing 10mA Angle Part No. Dice Lens Type Min. Typ. 2 1/2 L-710A8EW/1ID HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED 12 25 40 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions F peak Peak Wavelength High Efficiency Red 627 nm I =20mA D Dominant Wavelength High Efficiency Red 625 nm IF=20mA 1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V f=1MHz VF Forward Voltage High Efficiency Red 2. 0 2.5 V IF=20mA R R I Reverse Current High Efficiency Red 10 uA V = 5V Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current 1 160 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAE7178 REV NO: V.3 DATE:MAR/19/2005 PAGE: 2 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:H.Q.YUAN