L-710A8FG/1G1ID

T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: L-710A8FG/1G1ID GREEN HIGH EFFICIENCY RED Features Description The Green source color devices are made with Gallium PRE-TRIMMED LEADS FOR PC MOUNTING. Phosphide Green Light Emitting Diode. I.C. COMPATIBLE. The High Efficiency Red source color devices are made BLACK CASE ENHANCES CONTRAST RATIO. with Gallium Arsenide Phosphide on Gallium Phosphide WIDE VIEWING ANGLE. Orange Light Emitting Diode. HIGH RELIABILITY LIFE MEASURED IN YEARS. UL RATING : 94V-0. HOUSING MATERIAL: TYPE 66 NYLON. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG0944 REV NO: V.3 DATE: MAY/16/2007 PAGE: 1 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA Selection Guide Iv (mcd) 2 Viewing 10mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 GREEN (GaP) GREEN DIFFUSED 8 20 40 L-710A8FG/1G1ID HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED 12 25 40 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Green 565 peak Peak Wavelength nm IF=10mA High Efficiency Red 627 Green 568 D 1 Dominant Wavelength nm IF=10mA High Efficiency Red 625 Green 30 1/2 Spectral Line Half-width nm IF=10mA High Efficiency Red 45 Green 15 C Capacitance pF VF=0V f=1MHz High Efficiency Red 15 Green 2.0 2.5 VF 2 Forward Voltage V IF=10mA High Efficiency Red 1.9 2.5 Green 10 IR Reverse Current uA VR = 5V High Efficiency Red 10 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Green High Efficiency Red Units Power dissipation 62.5 75 mW DC Forward Current 25 30 mA Peak Forward Current 1 140 160 mA Reverse Voltage 5 5 V Operating/storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAG0944 REV NO: V.3 DATE: MAY/16/2007 PAGE: 2 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA