L-73CB/4YDA Kingbright

4.8mm RIGHT ANGLE LED INDICATOR P/N: L-73CB/4YDA YELLOW Description Features The Yellow source color devices are made with Gallium PRE-TRIMMED LEADS FOR PC MOUNTING. Arsenide Phosphide on Gallium Phosphide Yellow Light I.C. COMPATIBLE. Emitting Diode. BLACK CASE ENHANCES CONTRAST RATIO. WIDE VIEWING ANGLE. HIGH RELIABILITY-LIFE MEASURED IN YEARS. UL RATING : 94V-0. HOUSING MATERIAL: TYPE 66 NYLON. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAC7365 REV NO: V.4 DATE: APR/10/2006 PAGE: 1 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.K.ZHANGSelection Guide Iv (mcd) 2 V i e w i n g 10 mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 L-73CB/4YDA YELLOW (GaAsP/GaP) YELLOW DIFFUSED 5 20 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Yellow 590 nm IF=20mA D 1 Dominant Wavelength Yellow 588 nm IF=20mA 1/2 Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V f=1MHz VF 2 Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current 1 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAC7365 REV NO: V.4 DATE: APR/10/2006 PAGE: 2 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.K.ZHANG