L-816BGD Kingbright

10mm ROUND, BLINKING LED LAMP PRELIMINARY SPEC Part Number: L-816BGD GREEN Features Description z 10mm DIAMETER BIG LAMP WITH BUILT-IN The Green source color devices are made with Gallium BLINKING IC. Phosphide Green Light Emitting Diode. z OPERATION VOLTAGE FROM 3.5V to 14V. z BLINKING FREQUENCY FROM 3.0Hz to 1.5Hz. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAE1327 REV NO: V.4 DATE: APR/07/2007 PAGE: 1 OF 3 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU Selection Guide Iv (mcd) Viewing V=9V Angle Dice Lens Type Part No. Min. Typ. 2 1/2 L-816BGD GREEN (GaP) GREEN DIFFUSED 10 50 60 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Min. Typ. Max. Units Test Conditions peak Peak Wavelength Green 565 nm Dominant Wavelength Green 568 nm D 1/2 Spectral Line Half-width Green 30 nm Min:VF=3.5V IF Forward Current Green 8 22 mA Typ:VF=5V ISON Supply Current Green 8 mA VF = 3.5V ISON Supply Current Green 44 mA VF = 14V f Blink Frequency Green 1.5 3 Hz VF = 3.5V~14V Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 310 mW Forward Voltage 14 V Reverse Voltage 0.5 V Operating Temperature -40C To +70C Storage Temperature -40C To +85C Lead Solder Temperature 1 260C For 3 Seconds Lead Solder Temperature 2 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAE1327 REV NO: V.4 DATE: APR/07/2007 PAGE: 2 OF 3 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU