L-934FN/1G1ID Kingbright

T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: L-934FN/1G1ID Green High Efficiency Red Features Description z Pre-trimmed leads for pc mounting. The Green source color devices are made with Gallium z Black case enhances contrast ratio. Phosphide Green Light Emitting Diode. z High reliability life measured in years. The High Efficiency Red source color devices are made with z Housing UL rating:94V-0. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Housing material: type 66 nylon. Light Emitting Diode. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAD6927 REV NO: V.5A DATE: AUG/27/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102014058 Selection Guide Iv (mcd) 2 Viewing 10mA Angle 1 Part No. Dice Lens Type Min. Typ. 2 1/2 10 25 Green (GaP) Green Diffused 40 *10 *25 L-934FN/1G1ID 12 30 High Efficiency Red (GaAsP/GaP) Red Diffused 40 *10 *20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Green 565 peak Peak Wavelength nm IF=20mA High Efficiency Red 627 Green 568 D 1 Dominant Wavelength nm IF=20mA High Efficiency Red 617 Green 30 1/2 Spectral Line Half-width nm IF=20mA High Efficiency Red 45 Green 15 C Capacitance pF VF=0V f=1MHz High Efficiency Red 15 Green 2.2 2.5 VF 2 Forward Voltage F=20mA V I High Efficiency Red 2 2.5 Green 10 IR Reverse Current uA VR = 5V High Efficiency Red 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green High Efficiency Red Units Power dissipation 62.5 75 mW DC Forward Current 25 30 mA Peak Forward Current 1 140 160 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAD6927 REV NO: V.5A DATE: AUG/27/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102014058