L-934SA/1G1Y1ID

T-1 (3mm) TRI-LEVEL LED INDICATOR Part Number: L-934SA/1G1Y1ID Green Yellow High Efficiency Red Features Description z Pre-trimmed leads for pc mounting. The Green source color devices are made with Gallium z Black case enhances contrast ratio. Phosphide Green Light Emitting Diode. z Wide viewing angle. The Yellow source color devices are made with Gallium z High reliability life measured in years. Arsenide Phosphide on Gallium Phosphide Yellow Light z Housing UL rating:94V-0. Emitting Diode. z Housing material: type 66 nylon. The High Efficiency Red source color devices are made with z RoHS compliant. Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAB7427 REV NO: V.5A DATE: JUN/28/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102013870 Selection Guide Iv (mcd) 2 Viewing 10mA Angle 1 Part No. Dice Lens Type Min. Typ. 2 1/2 10 25 Green (GaP) Green Diffused 40 *10 *25 8 15 L-934SA/1G1Y1ID Yellow (GaAsP/GaP) Yellow Diffused 40 *8 *15 12 30 High Efficiency Red (GaAsP/GaP) Red Diffused 40 *10 *20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Green 565 peak Peak Wavelength Yellow 590 nm IF=20mA High Efficiency Red 627 Green 568 D 1 Dominant Wavelength Yellow 588 nm IF=20mA High Efficiency Red 617 Green 30 1/2 Spectral Line Half-width Yellow 35 nm IF=20mA High Efficiency Red 45 Green 15 C Capacitance Yellow 20 pF VF=0V f=1MHz High Efficiency Red 15 Green 2.2 2.5 VF 2 Forward Voltage Yellow 2.1 2.5 V IF=20mA High Efficiency Red 2 2.5 Green 10 IR Reverse Current Yellow 10 uA VR=5V High Efficiency Red 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Yellow High Efficiency Red Units Power dissipation 62.5 75 75 mW DC Forward Current 25 30 30 mA Peak Forward Current 1 140 140 160 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAB7427 REV NO: V.5A DATE: JUN/28/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102013870