SA08-11QBWAD Kingbright

20.32mm (0.8INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA08-11QBWA/D Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 0.8 inch digit height. The Blue source color devices are made with InGaN Light z Low current operation. Emitting Diode. z Excellent character appearance. Static electricity and surge damage the LEDS. z Easy mounting on P.C. boards or sockets. It is recommended to use a wrist band or anti-electrostatic z Categorized for luminous intensity. glove when handling the LEDs. z Mechanically rugged. All devices, equipment and machinery must be electrically z Standard : gray face, white segment. grounded. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01 )unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAM1193 REV NO: V.1 DATE: SEP/29/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: D.M.Su ERP: 1301002241 Selection Guide Iv (ucd) 1 10mA Part No. Dice Lens Type Description Min. Typ. Common Anode, SA08-11QBWA/D Blue (InGaN) White Diffused 5600 15000 Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Blue 468 nm IF=20mA D 1 Dominant Wavelength Blue 470 nm IF=20mA 1/2 Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 100 pF VF=0V f=1MHz VF 2 Forward Voltage Blue 3.3 4.0 V IF=20mA IR Reverse Current Blue 50 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current 1 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAM1193 REV NO: V.1 DATE: SEP/29/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: D.M.Su ERP: 1301002241