SA40-19QBWA-D Kingbright

100mm (4.0INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA40-19QBWA-D Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Large size. The Blue source color devices are made with InGaN Light z 4.0 inch digit height. Emitting Diode. z Low current operation. Static electricity and surge damage the LEDS. z Excellent character appearance. It is recommended to use a wrist band or anti-electrostatic z High light output. glove when handling the LEDs. z Easy mounting on P.C. boards or sockets. All devices, equipment and machinery must be electrically z Mechanically rugged. grounded. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01 )unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAK6346 REV NO: V.2B DATE: FEB/22/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.CHEN ERP: 1301003001 Selection Guide Iv (ucd) 1 10mA Part No. Dice Lens Type Description Min. Typ. Common Anode, Rt. SA40-19QBWA-D Blue (InGaN) White Diffused 31000 68000 Hand Decimal. Notes: 1. Luminous intensity/ luminous Flux: +/-15%. 2.Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Blue 460 nm IF=20mA D 1 Dominant Wavelength Blue 465 nm IF=20mA 1/2 Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 100 pF VF=0V f=1MHz Forward Voltage 13.2 16 VF 2 Blue V IF=20mA Per Segment Or (DP) (6.6) (8) Reverse Current 100 VR=5V IR Blue uA Per Segment Or (DP) 50 (VR=5V) Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 480 mW Per Segment Or (DP) (240) DC Forward Current 30 mA Per Segment Or (DP) (30) Peak Forward Current 1 150 mA Per Segment Or (DP) (150) Reverse Voltage 5 V Per Segment Or (DP) (5) Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAK6346 REV NO: V.2B DATE: FEB/22/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.CHEN ERP: 1301003001