SC40-19SURKWA Kingbright

101.2mm (4.0INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SC40-19SURKWA Hyper Red Features Description z Large size. The Hyper Red source color devices are made with Al- z 4.0 inch digit height. GaInP on GaAs substrate Light Emitting Diode. z Low current operation. z Excellent character appearance. z High light output. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01 )unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAM8476 REV NO: V.1A DATE: JAN/25/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301002235 Selection Guide Iv (ucd) 1 10mA Part No. Dice Lens Type Description Min. Typ. 88000 250000 Common Cathode, Rt. SC40-19SURKWA Hyper Red (AlGaInP) White Diffused Hand Decimal. *31000 *74000 Note: 1. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Hyper Red 645 nm IF=20mA D 1 Dominant Wavelength Hyper Red 630 nm IF=20mA 1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA C Capacitance Hyper Red 35 pF VF=0V f=1MHz Forward Voltage 7.8 10.0 VF 2 Hyper Red V IF=20mA Per Segment Or (DP) (3.9) (5.0) Reverse Current 20 VR=5V IR Hyper Red uA Per Segment Or (DP) (10) (VR=5V) Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Units Power dissipation 600 mW Per Segment Or (DP) (150) DC Forward Current 60 mA Per Segment Or (DP) (30) Peak Forward Current 1 370 mA Per Segment Or (DP) (185) Reverse Voltage 5 V Per Segment Or (DP) (5) Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAM8476 REV NO: V.1A DATE: JAN/25/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1301002235