TC23-11GWA Kingbright

58mm (2.3 INCH) 8x8 DOT MATRIX DISPLAY Part Number: TC23-11GWA Green Features Description z 2.3 INCH MATRIX HEIGHT. The Green source color devices are made with Gallium z DOT SIZE 5mm. Phosphide Green Light Emitting Diode. z LOW CURRENT OPERATION. z HIGH CONTRAST AND LIGHT OUTPUT. z COMPATIBLE WITH ASCII AND EBCDIC CODES. z STACKABLE HORIZONTALLY. z COLUMN CATHODE AND COLUMN ANODE AVAILABLE. z EASY MOUNTING ON P.C. BOARDS OR SOCKETS. z MULTICOLOR AVAILABLE. z MECHANICALLY RUGGED. z STANDARD : GRAY FACE, WHITE DOT. z RoHS COMPLIANT. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01 )unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD2465 REV NO: V.8 DATE: MAY/24/2007 PAGE: 1 OF 4 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1332000617 Selection Guide Iv (ucd) 1 10mA Part No. Dice Lens Type Description Min. Typ. TC23-11GWA Green (GaP) WHITE DIFFUSED 4700 18500 Column Cathode Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Green 565 nm IF=20mA D 1 Dominant Wavelength Green 568 nm IF=20mA 1/2 Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V f=1MHz VF 2 Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 62.5 mW DC Forward Current 25 mA Peak Forward Current 1 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD2465 REV NO: V.8 DATE: MAY/24/2007 PAGE: 2 OF 4 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1332000617